On Tuesday 03 August 2004 14:14, Alan Stern wrote: > David: > > The context here is that the DiMAGE A2 camera only sometimes responds to > SET_ADDRESS -- and only when UHCI's Full Speed Bandwidth Reclamation is > turned off. Do you have any idea what might be going on? Can you think > of any way to make it work with an EHCI or OHCI controller?
I think from what Sven-Olaf said, the issue is that the mass storage firmware on this device doesn't work anywhere as well as your file_storage gadget code ... :) It certainly enumerated OK at high speed in PTP mode. Since the PTP driver works OK, it's not hardware ... firmware then. So the usual suspicion is that maybe they only tested against MS-Windows or something ... was this the device that got you to experiment with a "get descriptor before set_address" patch? I'd really expect that a more MSFT-friendlly approach would work. - Dave ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
