On Wed, Aug 04, 2004 at 10:34:34PM +0100, Jonathan McDowell wrote:
> I'm seeing the above error, with the following traceback, when my
> machine loads the uss720 driver (for a Belkin F5U002).
>
> usb 1-2.4: new full speed USB device using address 3
> uss720: probe: vendor id 0x1293, device id 0x2
> uss720: set inteface result 0
> uss720: (C) 1999 by Thomas Sailer, <[EMAIL PROTECTED]>
> uss720: reg: da 0c 23 00 00 00 01
> uss720: epaddr 131 interval 1
> bad: scheduling while atomic!
> [<c029cfb9>] schedule+0x499/0x4a0
> [<cc8843bc>] uhci_submit_control+0x22c/0x270 [uhci_hcd]
> [<c029d088>] wait_for_completion+0x78/0xd0
> [<c01168b0>] default_wake_function+0x0/0x10
> [<cc8e1bf1>] hcd_submit_urb+0x111/0x1a0 [usbcore]
> [<c01168b0>] default_wake_function+0x0/0x10
> [<cc8e2931>] usb_start_wait_urb+0x81/0xc0 [usbcore]
> [<c011e72f>] register_proc_table+0xaf/0x110
> [<cc8e2830>] timeout_kill+0x0/0x80 [usbcore]
> [<cc8e29d2>] usb_internal_control_msg+0x62/0x80 [usbcore]
> [<cc8e2a7f>] usb_control_msg+0x8f/0xb0 [usbcore]
> [<cc8c318f>] set_1284_register+0x6f/0xb0 [uss720]
> [<cc8c35bb>] parport_uss720_restore_state+0x1b/0x50 [uss720]
> [<cc878d0e>] parport_claim+0x10e/0x210 [parport]
This seems to be where the problem lies; near the start of the function
is:
/* Preempt any current device */
write_lock_irqsave (&port->cad_lock, flags);
I've no idea how to fix this sort of thing though; presumably uss720
needs to call down into the USB layer in order to restore its state
ready to be claimed?
> [<cc87b518>] parport_open+0x98/0xf0 [parport]
> [<cc878e1f>] parport_claim_or_block+0xf/0x60 [parport]
> [<cc87c2a2>] parport_device_id+0x42/0x1a0 [parport]
> [<cc87b2c3>] parport_daisy_init+0x83/0x1d0 [parport]
> [<c0119e9f>] call_console_drivers+0x7f/0x100
> [<cc87852f>] parport_announce_port+0xf/0xd0 [parport]
> [<cc8c3c2d>] uss720_probe+0x16d/0x1a0 [uss720]
> [<cc8dd06c>] usb_probe_interface+0x4c/0x60 [usbcore]
> [<c01e3a52>] bus_match+0x32/0x60
> [<c01e3b69>] driver_attach+0x59/0x90
> [<c01a4ca2>] kobject_register+0x22/0x60
> [<c01e400c>] bus_add_driver+0x8c/0xb0
> [<c01e4538>] driver_register+0x28/0x30
> [<cc8dd12a>] usb_register+0x3a/0xa0 [usbcore]
> [<cc88a011>] uss720_init+0x11/0x36 [uss720]
> [<c012ea88>] sys_init_module+0xe8/0x1f0
> [<c0103fab>] syscall_call+0x7/0xb
J.
--
If at first you don't succeed, create an "NT" version.
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
