Hi all
I have an old thinkpad (560z) running debian testing with
the stock kernel 2.6.7-1-686. I also have a nifty "swissmemory":
a swiss army knife with a usb drive on it! It advertises itself
as linux compatible "kernel 2.4 or better", which is nice to see,
but when I insert it I get, in syslog,
Aug 4 22:31:21 turbot kernel: hub 1-0:1.0: connect-debounce failed,
port 1 disabled
Aug 4 22:32:00 turbot last message repeated 8 times
Aug 4 22:33:01 turbot last message repeated 9 times
Aug 4 22:34:02 turbot last message repeated 12 times
and so on. The device works fine in another linux machine with
a 2.6 kernel (an ibook) and the thinkpad recognises other
usb-storage devices (eg a maxtor USB external drive) without
a problem.
I'm stumped -- does anyone have any ideas on how to proceed?
Some machine specifics follow my signature
I made a similar post on usenet [comp.os.linux.hardware]
a few days ago, without response.
Jim
--
J. J. Green, Department of Applied Mathematics, Hicks Bd.,
Hounsfield Rd., University of Sheffield, Sheffield, UK.
+44 (0114) 222 3742, http://www.vindaloo.uklinux.net/jjg
turbot:~> cat /proc/version
Linux version 2.6.7-1-686 ([EMAIL PROTECTED]) (gcc version
3.3.4 (Debian 1:3.3.4-2)) #1 Thu Jul 8 05:36:53 EDT 2004
turbot:~> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 298.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr
bogomips : 585.72
turbot:~> cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
04d0-04d1 : pnp 00:0a
0cf8-0cff : PCI conf1
15e0-15ef : pnp 00:0a
4000-40ff : PCI CardBus #01
4400-44ff : PCI CardBus #01
4800-48ff : PCI CardBus #05
4800-48ff : 0000:05:00.0
4800-48ff : tulip
4c00-4cff : PCI CardBus #05
8000-801f : 0000:00:06.2
8000-801f : uhci_hcd
efa0-efbf : 0000:00:06.3
ef00-efaf : pnp 00:0a
ef00-ef3f : 0000:00:06.3
fcf0-fcff : 0000:00:06.1
fcf0-fcf7 : ide0
turbot:~> cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c9fff : Video ROM
000f0000-000fffff : System ROM
00100000-07fcffff : System RAM
00100000-0027acdc : Kernel code
0027acdd-0031f8ff : Kernel data
07fd0000-07fdefff : ACPI Tables
07fdf000-07fdffff : ACPI Non-volatile Storage
07fe0000-07ffffff : reserved
10000000-103fffff : PCI CardBus #01
10400000-107fffff : PCI CardBus #01
10800000-10bfffff : PCI CardBus #05
10800000-1081ffff : 0000:05:00.0
10c00000-10ffffff : PCI CardBus #05
10c00000-10c003ff : 0000:05:00.0
10c00000-10c003ff : tulip
48000000-48ffffff : 0000:00:03.0
48000000-480ea5ff : vesafb
49000000-491fffff : 0000:00:03.0
49400000-494fffff : 0000:00:03.0
50000000-50000fff : 0000:00:02.0
50000000-50000fff : yenta_socket
51000000-51000fff : 0000:00:02.1
51000000-51000fff : yenta_socket
fffe0000-ffffffff : reserved
turbot:~> lsmod
Module Size Used by
snd_pcm_oss 55048 0
snd_pcm 98756 1 snd_pcm_oss
snd_page_alloc 11752 1 snd_pcm
snd_timer 25668 1 snd_pcm
nfs 193760 0
lockd 63944 1 nfs
sunrpc 153092 2 nfs,lockd
snd_mixer_oss 20096 1 snd_pcm_oss
ds 18532 4
snd 56644 4
snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 10336 1 snd
ipv6 255488 15
af_packet 22376 4
tulip 47168 0
crc32 4320 1 tulip
uhci_hcd 32880 0
usbcore 114784 3 uhci_hcd
yenta_socket 21440 1
pcmcia_core 68132 2 ds,yenta_socket
tsdev 7328 0
mousedev 10444 2
evdev 9568 0
dm_mod 44960 0
capability 4520 0
commoncap 7200 1 capability
psmouse 20360 0
apm 18348 2
ide_cd 43332 0
cdrom 40352 1 ide_cd
genrtc 9608 0
ext2 72392 7
ext3 127144 0
jbd 62264 1 ext3
mbcache 9348 2 ext2,ext3
ide_disk 19264 9
ide_generic 1408 0
piix 13440 1
ide_core 142808 4 ide_cd,ide_disk,ide_generic,piix
unix 28624 94
fbcon 27460 73
font 8320 1 fbcon
vesafb 6656 1
cfbcopyarea 3840 1 vesafb
cfbimgblt 3040 1 vesafb
cfbfillrect 3776 1 vesafb
turbot:~> lsusb
Bus 001 Device 001: ID 0000:0000
turbot:~> lspci -vvv
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 64
Region 0: Memory at <unassigned> (32-bit, prefetchable)
0000:00:02.0 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Subsystem: IBM ThinkPad 600
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10000000-103ff000 (prefetchable)
Memory window 1: 10400000-107ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
0000:00:02.1 CardBus bridge: Texas Instruments PCI1250 (rev 02)
Subsystem: IBM ThinkPad 600
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 10800000-10bff000 (prefetchable)
Memory window 1: 10c00000-10fff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt-
PostWrite+
16-bit legacy interface ports at 0001
0000:00:03.0 VGA compatible controller: Neomagic Corporation NM2160
[MagicGraph 128XD] (rev 01) (prog-if 00 [VGA])
Subsystem: IBM MagicGraph 128XD
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (4000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 48000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at 49000000 (32-bit, non-prefetchable) [size=2M]
Region 2: Memory at 49400000 (32-bit, non-prefetchable) [size=1M]
0000:00:06.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:06.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at fcf0 [size=16]
0000:00:06.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 48
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 8000 [size=32]
0000:00:06.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
0000:05:00.0 Ethernet controller: Abocom Systems Inc ADMtek Centaur-C rev
17 [D-Link DFE-680TX] CardBus Fast Ethernet Adapter (rev 11)
Subsystem: Abocom Systems Inc ADMtek Centaur-C rev 17 [D-Link
DFE-680TX] CardBus Fast Ethernet Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4800 [size=256]
Region 1: Memory at 10c00000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at 10800000 [disabled] [size=128K]
Capabilities: <available only to root>
-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
