On Sat, Aug 28, 2004 at 05:20:44PM -0400, Alan Stern wrote: Hi!
> > I doubt it needs a multi-targ entry, as that is only for > > USB to SCSI adaptors which support multiple target > > devicse on the SCSI bus. > > > > It would help to have a better bug report. The log > > provided doesn't show any real 'errors', other than some > > unusual returns codes from the device. What, exactly, > > went wrong here? > > > > Matt > > Note to the bug reporter: It would help to see > /proc/bus/usb/devices with the stick plugged in. Ups sorry, seems that I missed it. As I don't have my hands right now on the 2.6-box I could provide the same dump for a 2.4-powered box. I believe in this case it is the same information. ---------------------------------------------------------------------- (2050) ~> cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=b000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 60/900 us ( 7%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=b400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 P: Vendor=054c ProdID=0099 Rev= 1.00 S: Manufacturer=Sony S: Product=Sony PEG Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 6mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=05 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms ---------------------------------------------------------------------- > Other people have experienced problems with Clies. It may > help to give the device some time to warm up before using > it. That is, make sure [...] > 30 seconds -- I don't know just how long it needs), then > modprobe usb-storage. I bet that will work. Ok, I'll give this a try and report wether it works. > (BTW, these devices might be a good reason for using that > new delayed-scanning patch.) Sorry, I'm not that deep in the matter that I know what you're talking about here. I could include that patch and give it a try as well if you give me some pointer where to get it. > Alternatively, someone who didn't want to fool around like > that sent in an unusual_devs.h entry for a Clie model with > the FIX_INQUIRY flag set, and that helped him. I could > tell you what needs to be added, but first I have to see > your /proc/bus/usb/devices file. If I can be of any help tell me what to do, but I should say, that I'm no kernel hacker so I'd need some simple instructions on that end. In other words: for me all this sounds very professional but I don't really understand what you're talking about. ;) What I got is that the Clie connects to the USB and tells "no device". To Christophs Remark: > The report at > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=263901 > looks to me like this device needs an US_FL_SCM_MULT_TARG > entry? Still wondering why it works in 2.4 then. When I tried a 2.4 series Kernel I used a RedHat Kernel 2.4.20-31.9, no Vanilla. I'm not sure what patches RedHat inclueds in their kernels but it might be that they fixed there something to get it working. I also have a report that the Clie works fine on a Mandrake 2.6.(3?) kernel. So they had to include some patches there. (Unfortunatley the person who send me that report is a lot farer away than I am to give you or me any clues why it works with the MDK-stuff. Besides that MDK seems to be maximally away from Vanilla.) Seems that the device needs at least a 2.4.19 with some patches or newer. Unfortunately even there the informations on the net are not that detailed (and/or my japanese is not that well...) -- Kind regards, / War is Peace. | Freedom is Slavery. Alexander Wagner | Ignorance is Strength. ----------------------------| Theoretische Physik II | Theory : G. Orwell, "1984" Universitaet Wuerzburg / In practice: USA, since 2001 ------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
