Here is the result from a static kernel.
BOOTP S = 1
FILE: lemon
Load Addr=0x4000 Max Size=0xbfc000
FINAL Packet Count = 3316
FINAL File Size = 1697344 bytes.
chrpboot starting: loaded at 0x00800000
gunzipping (0x00010000 <- 0x00806c4c:0x0098c482)...done 3517428 bytes
49352 bytes of heap consumed, max in use 40936
start address = 0x10000
instantiating rtas at 00600000 ... done
opening display /[EMAIL PROTECTED]/[EMAIL PROTECTED] ok
copying OF device tree...done
Calling quiesce ...
returning 0x00010000 from prom_init
Total memory = 768MB; using 2048kB for hash table (at c0800000)
Linux version 2.6.9-rc1-bk15-bug35101 ([EMAIL PROTECTED]) (gcc version 3.3.3 (SuSE
Linux)) #3 Wed Sep 8 15:36:32 CEST 2004
PCI bus 0 controlled by pci at 80000000
RTAS Event Scan Rate: 1 (29999 jiffies)
On node 0 totalpages: 196608
DMA zone: 196608 pages, LIFO batch:16
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: debug root=/dev/sda3 init=/bin/bash
OpenPIC at f8ec0000 (size 40000)
OpenPIC irqs 0..15 in IDU
OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at fd3be000
PID hash table entries: 4096 (order: 12, 65536 bytes)
time_init: decrementer frequency = 20.781066 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 772096k available (2000k kernel code, 2496k data, 120k init, 0k highmem)
Calibrating delay loop... 372.73 BogoMIPS (lpj=186368)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
PCI: Probing PCI hardware
Registering openpic with sysfs...
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
request_OF_resource(interrupt-controller), parent not found
PCI: Via IRQ fixup for 0000:00:12.0, from 18 to 2
PCI: Via IRQ fixup for 0000:00:12.1, from 17 to 1
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
loop: loaded (max 8 devices)
pcnet32.c:v1.30i 06.28.2004 [EMAIL PROTECTED]
PCI: Enabling device 0000:00:0c.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbfec00, 00 04 ac 97 35 56
tx_start_pt(0x0c00):~220 bytes, BCR18(68e2):BurstWrEn BurstRdEn DWordIO NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 22.
eth0: registered as PCnet/FAST 79C971
pcnet32: 1 cards_found.
PCI: Enabling device 0000:00:10.0 (0140 -> 0143)
sym0: <875> rev 0x4 at pci 0000:00:10.0 irq 23
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Using anticipatory io scheduler
sym0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
Vendor: IBM Model: DNES-309170W Rev: SA40
Type: Direct-Access ANSI SCSI revision: 03
sym0:2:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:2:0): Beginning Domain Validation
scsi(0:0:2:0): Domain Validation skipping write tests
scsi(0:0:2:0): Ending Domain Validation
Vendor: IBM Model: CDRM00203 !K Rev: 1_01
Type: CD-ROM ANSI SCSI revision: 02
scsi(0:0:3:0): Beginning Domain Validation
sym0:3: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 15)
scsi(0:0:3:0): Domain Validation skipping write tests
scsi(0:0:3:0): Ending Domain Validation
sym0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
Vendor: IBM Model: DNES-309170W Rev: SA40
Type: Direct-Access ANSI SCSI revision: 03
sym0:4:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:4:0): Beginning Domain Validation
scsi(0:0:4:0): Domain Validation skipping write tests
scsi(0:0:4:0): Ending Domain Validation
SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
SCSI device sdb: 17774160 512-byte hdwr sectors (9100 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
Attached scsi disk sdb at scsi0, channel 0, id 4, lun 0
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
PCI: Enabling device 0000:00:12.2 (0140 -> 0142)
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:00:12.2: reset hcc_params 6872 thresh 7 uframes 256/512/1024
ehci_hcd 0000:00:12.2: capability 0001 at 68
ehci_hcd 0000:00:12.2: irq 17, pci mem f1012000
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:12.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
ehci_hcd 0000:00:12.2: supports USB remote wakeup
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.9-rc1-bk15-bug35101 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v2.2
PCI: Enabling device 0000:00:12.0 (0140 -> 0141)
uhci_hcd 0000:00:12.0: UHCI Host Controller
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
uhci_hcd 0000:00:12.0: irq 18, io base 00bff000
uhci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:12.0: detected 2 ports
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: default language 0x0409
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.9-rc1-bk15-bug35101 uhci_hcd
usb usb2: SerialNumber: 0000:00:12.0
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:12.2: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
PCI: Enabling device 0000:00:12.1 (0140 -> 0141)
uhci_hcd 0000:00:12.1: UHCI Host Controller
ehci_hcd 0000:00:12.2: port 1 high speed
ehci_hcd 0000:00:12.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using address 2
uhci_hcd 0000:00:12.1: irq 17, io base 00bff400
uhci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:12.1: detected 2 ports
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: default language 0x0409
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.9-rc1-bk15-bug35101 uhci_hcd
usb usb3: SerialNumber: 0000:00:12.1
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
uhci_hcd 0000:00:12.0: suspend_hc
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
usb 1-1: default language 0x0409
usb 1-1: Product: USB TO IDE
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usb-storage 1-1:1.0: usb_probe_interface
usb-storage 1-1:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is 1, data is 0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
uhci_hcd 0000:00:12.1: suspend_hc
NET: Registered protocol family 17
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Faking INQUIRY command
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x81 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
ReiserFS: sda3: using ordered data mode
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x81 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x8c L 8 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x8c R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 25431840 512-byte hdwr sectors (13021 MB)
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 c0 00
usb-storage: Bulk Command S 0x43425355 T 0x91 L 192 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes
ReiserFS: sda3: Using r5 hash to sort names
usb-storage: Status code -32; transferred 0/192
usb-storage: clearing endpoint halt for pipe 0xc0008280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 120k init 28k pmac 8k prep
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x91 R 192 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000091 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000091 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: Invalid field in cdb
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sdc: test WP failed, assume Write Enabled
sdc: assuming drive cache: write through
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0xa7 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xa7 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0xac L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xac R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x800000ac L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x800000ac R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
usb-storage: Illegal Request: Invalid field in cdb
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sdc:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0xb4 L 4096 F 128 Trg 0 LUN 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
(none):/# usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling sg request
usb-storage: Status code -104; transferred 0/4096
usb-storage: -- transfer cancelled
usb-storage: Bulk data transfer result 0x4
usb-storage: -- command was aborted
usb-storage: usb_stor_Bulk_reset called
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
usb-storage: Timeout -- cancelling URB
usb-storage: Soft reset failed: -104
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0xb4 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/13
usb-storage: -- transfer cancelled
usb-storage: Bulk status result = 4
usb-storage: -- command was aborted
usb-storage: usb_stor_Bulk_reset called
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
usb-storage: Timeout -- cancelling URB
usb-storage: Soft reset failed: -104
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: device_reset called
usb-storage: usb_stor_Bulk_reset called
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
usb-storage: Timeout -- cancelling URB
usb-storage: Soft reset failed: -104
usb-storage: bus_reset called
(none):/# mount proc
(none):/# w
15:34:52 up 3 min, 0 users, load average: 2.04, 1.18, 0.48
USER TTY LOGIN@ IDLE JCPU PCPU WHAT
(none):/# echo t > /proc/sysrq-trigger
SysRq : Show State
sibling
task PC pid father child younger older
bash R running 0 1 0 2 (NOTLB)
ksoftirqd/0 S 00000000 0 2 1 3 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c001eba8] ksoftirqd+0xc8/0xd4
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
events/0 S 00000000 0 3 1 4 19 2 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c002ac0c] worker_thread+0x224/0x228
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
khelper S 00000000 0 4 3 5 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c002ac0c] worker_thread+0x224/0x228
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
netlink/0 S 00000000 0 5 3 18 4 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c002ac0c] worker_thread+0x224/0x228
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
kblockd/0 S 00000000 0 18 3 29 5 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c002ac0c] worker_thread+0x224/0x228
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
khubd D 00000000 0 19 1 31 3 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c01f116c] io_schedule+0x34/0x5c
[c0035528] __lock_page+0xd4/0x128
[c00364e8] read_cache_page+0x198/0x344
[c008a1c4] read_dev_sector+0x34/0x11c
[c008af54] msdos_partition+0x54/0x6d4
[c008a44c] check_partition+0xd8/0x164
[c008a6ec] register_disk+0x100/0x16c
[c01349c8] add_disk+0x58/0x74
[c015a0f0] sd_probe+0x1ec/0x2fc
[c012ab0c] bus_match+0x50/0x94
[c012aba8] device_attach+0x58/0xd0
[c012af50] bus_add_device+0x78/0x15c
[c012989c] device_add+0x9c/0x180
pdflush S 00000000 0 29 3 30 18 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c003c398] pdflush+0xc0/0x1f4
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
pdflush S 00000000 0 30 3 32 29 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c003c398] pdflush+0xc0/0x1f4
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
aio/0 S 00000000 0 32 3 171 30 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c002ac0c] worker_thread+0x224/0x228
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
kswapd0 S 00000000 0 31 1 138 19 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c0042b84] kswapd+0x98/0x2dc
[c00096c4] kernel_thread+0x44/0x60
scsi_eh_0 S 00000000 0 138 1 167 31 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c01f0914] __down_interruptible+0xcc/0x15c
[c0146ee8] scsi_error_handler+0x4dc/0x9d8
[c00096c4] kernel_thread+0x44/0x60
scsi_eh_1 D 00000000 0 167 1 168 138 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c01f07e8] __down+0xc0/0x120
[c015d094] usb_reset_device+0x78/0xbc
[c017ce34] bus_reset+0xf4/0x13c
[c0145ddc] scsi_try_bus_reset+0x68/0xd8
[c0146fa8] scsi_error_handler+0x59c/0x9d8
[c00096c4] kernel_thread+0x44/0x60
usb-storage S 00000000 0 168 1 167 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c01f0914] __down_interruptible+0xcc/0x15c
[c0180138] usb_stor_control_thread+0x254/0x34c
[c00096c4] kernel_thread+0x44/0x60
reiserfs/0 S 00000000 0 171 3 32 (L-TLB)
Call trace:
[c000a0a8] __switch_to+0x48/0x70
[c01f0e18] schedule+0x2b0/0x5d0
[c002ac0c] worker_thread+0x224/0x228
[c002faa8] kthread+0xf0/0x12c
[c00096c4] kernel_thread+0x44/0x60
(none):/#
--
USB is for mice, FireWire is for men!
sUse lINUX ag, nÃRNBERG
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_idP47&alloc_id808&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
