Output from "dmesg":
ohci_hcd 0000:02:00.0: wakeup
hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 2-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
usb 2-1: new full speed USB device using address 4
usb-storage: This device (059f,a601,0200 S 01 P 00) has an unneeded SubClass ent ry in unusual_devs.h
Please send a copy of this message to <[EMAIL PROTECTED]>
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: QUANTUM Model: FIREBALL CX6.4A Rev: A3F.
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 12594960 512-byte hdwr sectors (6449 MB)
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: unknown partition table
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 4
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
