Hello Luca, The text appears to show that the device accepts high-speed only, and a disconnect from a high-speed hub 4, and a reconnect to a full-speed hub 2 is doomed to fail.
Regards Gerald Quoting Luca <[EMAIL PROTECTED]>: > dc1100: V4L2 driver for CT-DC1100 Video and Camera Controllers v1:1.00 > dc1100: (C) 2004 Luca Risolia > dc1100 4-1:1.0: usb_probe_interface > dc1100 4-1:1.0: usb_probe_interface - got id > usb 4-1: CT-DC1100 Video and Camera Controller detected (vid/pid > 0x0932/0x1100) > usb 4-1: Device is at High-Speed mode > usb 4-1: SAA7113H video source detected > usb 4-1: Initialization succeeded > usb 4-1: V4L2 device registered as /dev/video0 > usbcore: registered new driver dc1100 > Oct 6 16:58:13 luca kernel: ehci_hcd 0000:00:09.2: fatal error > Oct 6 16:58:13 luca kernel: usb 4-1: usb_submit_urb() failed, error -108 > Oct 6 16:58:13 luca kernel: ehci_hcd 0000:00:09.2: HC died; cleaning up > Oct 6 16:58:13 luca kernel: usb 4-1: USB disconnect, address 2 > Oct 6 16:58:13 luca kernel: usb 2-1: new full speed USB device using address > > 3 > Oct 6 16:58:13 luca kernel: usb 2-1: not running at top speed; connect to a > > high speed hub > Oct 6 16:58:13 luca kernel: usb 2-1: Product: USB 2.0 Camera > Oct 6 16:58:13 luca kernel: usb 2-1: Manufacturer: Crescentec Corp. > Oct 6 16:58:14 luca kernel: usb 2-1: CT-DC1100 Video and Camera Controller > detected (vid/pid 0x0932/0x1100) > Oct 6 16:58:14 luca kernel: usb 2-1: Sorry, Full-Speed mode (old USB 1.x) is > > not supported ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
