yes.... but this occurs on two different computers... (??)
also... if the phone is plugged in and when the computer powers up it then recognizes the device as acm type... but if i hotplug in after system is up and running (or unplug then plug it in... then the below error occurs) i was not sure whether this still is related to FAQ.html#ts6 >> >> dmesg showing this >> >> >> hub.c: USB new device connect on bus1/1/3, assigned device number 4 >> usb-uhci.c: interrupt, status 2, frame# 276 >> usb.c: USB device not accepting new address=4 (error=-110) >> hub.c: USB new device connect on bus1/1/3, assigned device number 5 >> usb.c: USB device not accepting new address=5 (error=-110) > > Did you read > http://www.linux-usb.org/FAQ.html#ts6 > already? > > thanks, > > greg k-h > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
