Hi
I have a problem since 3 weeks on using an 2 port Switch from ATEN
International
Could you please help me?
I still have the error message "usb-uhci.c: interrupt, status 3, frame# "
Thanks for your Help in advance
Greets Marco
: lspci -v
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04)
(prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 00c6
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at ff80 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
Subsystem: Dell Computer Corporation: Unknown device 00c6
Flags: medium devsel, IRQ 10
I/O ports at dcd0 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04)
(prog-if 00 [UHCI])
Subsystem: Dell Computer Corporation: Unknown device 00c6
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at ff60 [size=32]
: cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 28/900 us ( 3%), #Int= 2, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ff60
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0409 ProdID=0058 Rev= 1.00
S: Manufacturer=NEC Corporation
S: Product=USB2.0 Hub Controller
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=02 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0557 ProdID=2207 Rev= 0.82
S: Manufacturer=ATEN
S: Product=2Ports USB KVM C
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=5ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
: dmesg
usb.c: registered new driver hiddev
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 2, frame# 1054
usb_control/bulk_msg: timeout
input: USB HID v1.01 Keyboard [ATEN 2Ports USB KVM C] on usb2:3.0
usb-uhci.c: interrupt, status 3, frame# 1964
usb-uhci.c: interrupt, status 3, frame# 828
usb_control/bulk_msg: timeout
input: USB HID v1.00 Mouse [ATEN 2Ports USB KVM C] on usb2:3.1
usb-uhci.c: interrupt, status 3, frame# 1740
usb-uhci.c: interrupt, status 3, frame# 604
usb-uhci.c: interrupt, status 3, frame# 1516
: cat /var/log/messages
Nov 25 14:16:17 linux007 /etc/hotplug/pci.rc[3868]: ** can't synthesize pci
hotplug events
Nov 25 14:16:17 linux007 /etc/hotplug/usb.rc[3876]: loaded HCD: usb-uhci
Nov 25 14:16:17 linux007 kernel: uhci.c: USB Universal Host Controller
Interface driver v1.1
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: Setup usbcore from
usb.handmap for USB product 0/0/0
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: Setup usbcore from
modules.usbmap for USB product 0/0/0
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: modules.usbmap
unparsable line:
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: .
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: Wrote remover script
'/var/run/hotplug/usb-remover-%0%0%0%' with following content:
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: remover script:
COUNT=1
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:18 linux007 /etc/hotplug/usb.agent[3893]: mount: /dev/sda1 is
not a valid block device
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: Setup usbcore from
usb.handmap for USB product 0/0/0
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: Setup usbcore from
modules.usbmap for USB product 0/0/0
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: modules.usbmap
unparsable line:
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: .
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: Wrote remover script
'/var/run/hotplug/usb-remover-%0%0%0%' with following content:
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: remover script:
COUNT=1
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: remover script:
COUNT=2
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3943]: mount: /dev/sda1 is
not a valid block device
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3994]: Setup usbcore from
usb.handmap for USB product 0/0/0
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3994]: Setup usbcore from
modules.usbmap for USB product 0/0/0
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3994]: modules.usbmap
unparsable line:
Nov 25 14:16:19 linux007 /etc/hotplug/usb.agent[3994]: .
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: Wrote remover script
'/var/run/hotplug/usb-remover-%0%0%0%' with following content:
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: remover script:
COUNT=1
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: remover script:
COUNT=2
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: remover script:
COUNT=3
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[3994]: mount: /dev/sda1 is
not a valid block device
Nov 25 14:16:20 linux007 /etc/hotplug/usb.agent[4045]: Setup keybdev
mousedev from usb.handmap for USB product 0/0/0
Nov 25 14:16:20 linux007 insmod: Using
/lib/modules/2.4.21-99-default/kernel/drivers/input/keybdev.o
Nov 25 14:16:20 linux007 insmod: Symbol version prefix ''
Nov 25 14:16:21 linux007 kernel: mice: PS/2 mouse device common for all mice
Nov 25 14:16:21 linux007 insmod: Using
/lib/modules/2.4.21-99-default/kernel/drivers/input/mousedev.o
Nov 25 14:16:21 linux007 insmod: Symbol version prefix ''
Nov 25 14:16:21 linux007 /etc/hotplug/usb.agent[4045]: BeepInfo: TYPE=usb
ACTION=add DRIVERS=keybdev
Nov 25 14:16:21 linux007 /etc/hotplug/usb.agent[4045]: mousedev
DEVICE=/proc/bus/usb/002/003
Nov 25 14:16:21 linux007 /etc/hotplug/usb.agent[4045]: Setup hid from
modules.usbmap for USB product 0/0/0
Nov 25 14:16:21 linux007 kernel: usb.c: registered new driver hiddev
Nov 25 14:16:21 linux007 kernel: usb.c: registered new driver hid
Nov 25 14:16:21 linux007 kernel: usb-uhci.c: interrupt, status 2, frame#
1853
Nov 25 14:16:26 linux007 kernel: usb_control/bulk_msg: timeout
Nov 25 14:16:26 linux007 kernel: input: USB HID v1.01 Keyboard [ATEN 2Ports
USB KVM C] on usb2:3.0
Nov 25 14:16:26 linux007 kernel: usb-uhci.c: interrupt, status 3, frame# 716
Nov 25 14:16:31 linux007 kernel: usb-uhci.c: interrupt, status 3, frame#
1628
Nov 25 14:16:31 linux007 kernel: usb_control/bulk_msg: timeout
Nov 25 14:16:31 linux007 insmod: Using
/lib/modules/2.4.21-99-default/kernel/drivers/usb/hid.o
Nov 25 14:16:31 linux007 insmod: Symbol version prefix ''
Nov 25 14:16:31 linux007 kernel: input: USB HID v1.00 Mouse [ATEN 2Ports USB
KVM C] on usb2:3.1
Nov 25 14:16:31 linux007 kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech
Pavlik <[EMAIL PROTECTED]>
Nov 25 14:16:31 linux007 kernel: hid-core.c: USB HID support drivers
Nov 25 14:16:31 linux007 /etc/hotplug/usb.agent[4045]: modules.usbmap
unparsable line:
Nov 25 14:16:31 linux007 /etc/hotplug/usb.agent[4045]: .
Nov 25 14:16:31 linux007 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt
128 rq 6 len 59 ret -75
Nov 25 14:16:31 linux007 /etc/hotplug/usb.agent[4045]: cannot get config
descriptor 0, Value too large for defined data type (75)
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: Wrote remover script
'/var/run/hotplug/usb-remover-%0%0%0%' with following content:
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script:
COUNT=1
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script:
COUNT=2
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script:
COUNT=3
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script:
COUNT=4
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: remover script: test
$COUNT -gt 1 && exit
Nov 25 14:16:32 linux007 /etc/hotplug/usb.agent[4045]: mount: /dev/sda1 is
not a valid block device
Nov 25 14:16:36 linux007 kernel: usb-uhci.c: interrupt, status 3, frame# 492
Nov 25 14:16:41 linux007 kernel: usb-uhci.c: interrupt, status 3, frame#
1404
Nov 25 14:16:46 linux007 kernel: usb-uhci.c: interrupt, status 3, frame# 268
Nov 25 14:16:51 linux007 kernel: usb-uhci.c: interrupt, status 3, frame#
1180
Nov 25 14:16:56 linux007 kernel: usb-uhci.c: interrupt, status 3, frame# 44
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
