James, are you able to confirm that this problem is still present in current kernels? Say, 2.6.10-rc2 plus ftp://ftp.kernel.org/pub/linux/kernel/v2.6/snapshots/patch-2.6.10-rc2-bk9.gz ?
Thanks. James Lamanna <[EMAIL PROTECTED]> wrote: > > I just noticed that 2.6.9 seems to have broken support for my Cirque USB > touchpad. > With 2.6.8-gentoo-r4 it works fine with essentially the same kernel config: > > hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s > hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 > usb 2-1: new low speed USB device using address 3 > usb 2-1: skipped 1 descriptor after interface > usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-1: default language 0x0409 > usb 2-1: Product: USB GlidePoint > usb 2-1: Manufacturer: Cirque Corporation > usb 2-1: hotplug > usb 2-1: adding 2-1:1.0 (config #1, interface 0) > usb 2-1:1.0: hotplug > usbhid 2-1:1.0: usb_probe_interface > usbhid 2-1:1.0: usb_probe_interface - got id > input: USB HID v1.00 Mouse [Cirque Corporation USB GlidePoint] on > usb-0000:00:10.0-1 > > With 2.6.9-gentoo-r1 I get the following USB debug messages: > > usb 2-1: new low speed USB device using address 5 > uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000 > [000001003f891300] link (3f891242) element (3f890060) > 0: [000001003f890060] link (3f8900c0) e0 LS Stalled CRC/Timeo Length=7 > MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3f5d84e0) > 1: [000001003f8900c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff > DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) > uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000 > [000001003f891300] link (3f891242) element (3f890060) > 0: [000001003f890060] link (3f8900c0) e0 LS Stalled CRC/Timeo Length=7 > MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3f5d84e0) > 1: [000001003f8900c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff > DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) > usb 2-1: device not accepting address 5, error -71 > uhci_hcd 0000:00:10.0: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32 > usb 2-1: new low speed USB device using address 6 > uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000 > [000001003f891300] link (3f891242) element (3f890060) > 0: [000001003f890060] link (3f8900c0) e0 LS Stalled CRC/Timeo Length=7 > MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3f5d84e0) > 1: [000001003f8900c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff > DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) > uhci_hcd 0000:00:10.0: uhci_result_control: failed with status 440000 > [000001003f891300] link (3f891242) element (3f890060) > 0: [000001003f890060] link (3f8900c0) e0 LS Stalled CRC/Timeo Length=7 > MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=3f5d8500) > 1: [000001003f8900c0] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff > DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) > usb 2-1: device not accepting address 6, error -71 > > Here are relevant config vars: > CONFIG_X86_64=y > CONFIG_64BIT=y > CONFIG_X86=y > CONFIG_MMU=y > CONFIG_RWSEM_GENERIC_SPINLOCK=y > CONFIG_X86_TSC=y > CONFIG_X86_GOOD_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_MTRR=y > CONFIG_SMP=y > CONFIG_PREEMPT=y > > CONFIG_INPUT=y > > CONFIG_INPUT_EVDEV=y > CONFIG_INPUT_MOUSE=y > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > CONFIG_INPUT_JOYDEV=y > > > CONFIG_USB=y > CONFIG_USB_DEBUG=y > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_SUSPEND is not set > # CONFIG_USB_OTG is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_EHCI_HCD=y > CONFIG_USB_UHCI_HCD=y > > CONFIG_USB_HID=y > CONFIG_USB_HIDINPUT=y > # CONFIG_HID_FF is not set > CONFIG_USB_HIDDEV=y > > -- > James Lamanna > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
