On 7 Dec 2004, at 06:28, David Brownell wrote:
On Monday 06 December 2004 5:32 pm, James Pattinson wrote:Here is what I get in the syslog when I plug it in:
usb 2-1: new full speed USB device using address 6 hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected usb 2-1.3: new low speed USB device using address 7 usb 2-1.3: control timeout on ep0in HID device not claimed by input or hiddev usbhid: probe of 2-1.3:1.0 failed with error -5 usb 2-1.3: control timeout on ep0in
The hub worked just fine. That HID device is the problem, and it's probably one you can just ignore. (Unless you want to write a driver for it ... monitor control class?)
Thanks for the clarification! I didn't know that the USB connection was actually used for anything. I imagine if I had it hooked up to an Apple I could change the brightness from the host.
I will follow Alan's advice and get some debug from the driver to see if the hang can be eliminated.
Thanks James
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
