Hi ! I have a serious bug on my Fedora core 3 (kernel 2.6.9-1.681_FC3), when plugging my USB key (lexar), but same applies for my USB printer(epson cx 5200). They were both working fine on FC1. My card is asustech k7m, Athlon 550Mhz. Don't know more.
I have been told to send this message here, and some logs (lspci at the end). Is there already a solution ? Hope this helps ! JC Dec 17 20:34:22 localhost kernel: ohci_hcd 0000:00:07.4: wakeup Dec 17 20:34:22 localhost kernel: usb 1-1: new full speed USB device using address 2 Dec 17 20:34:22 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Dec 17 20:34:22 localhost kernel: Vendor: LEXAR Model: JUMPDRIVE PRO Rev: 0 Dec 17 20:34:22 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Dec 17 20:34:23 localhost scsi.agent[724]: disk at /devices/pci0000:00/0000:00:07.4/usb1/1-1/1-1:1. 0/host0/0:0:0:0 Dec 17 20:34:24 localhost kernel: SCSI device sda: 503808 512-byte hdwr sectors (258 MB) Dec 17 20:34:24 localhost kernel: sda: Write Protect is off Dec 17 20:34:24 localhost kernel: sda: assuming drive cache: write through Dec 17 20:34:24 localhost kernel: sda:<3>hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling.. . Dec 17 20:34:24 localhost kernel: usb 1-1: USB disconnect, address 2 Dec 17 20:34:54 localhost kernel: scsi: Device offlined - not ready after error recovery: host 0 ch annel 0 id 0 lun 0 Dec 17 20:34:54 localhost kernel: sd 0:0:0:0: Illegal state transition cancel->offline Dec 17 20:34:54 localhost kernel: Badness in scsi_device_set_state at drivers/scsi/scsi_lib.c:1691 Dec 17 20:34:54 localhost kernel: [<12aac643>] scsi_device_set_state +0xc8/0xd3 [scsi_mod] Dec 17 20:34:54 localhost kernel: [<12aa9b8b>] scsi_eh_offline_sdevs +0x49/0x5e [scsi_mod] Dec 17 20:34:54 localhost kernel: [<12aaa146>] scsi_unjam_host +0x22d/0x23e [scsi_mod] Dec 17 20:34:54 localhost kernel: [<12aaa291>] scsi_error_handler +0x13a/0x191 [scsi_mod] Dec 17 20:34:54 localhost kernel: [<0211b669>] schedule_tail+0xc/0x37 Dec 17 20:34:54 localhost kernel: [<12aaa157>] scsi_error_handler +0x0/0x191 [scsi_mod] Dec 17 20:34:54 localhost kernel: [<021041d9>] kernel_thread_helper +0x5/0xb Dec 17 20:35:24 localhost kernel: scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0 Dec 17 20:35:24 localhost kernel: sd 0:0:0:0: Illegal state transition cancel->offline Dec 17 20:35:24 localhost kernel: Badness in scsi_device_set_state at drivers/scsi/scsi_lib.c:1691 Dec 17 20:35:24 localhost kernel: [<12aac643>] scsi_device_set_state +0xc8/0xd3 [scsi_mod] Dec 17 20:35:24 localhost kernel: [<12aa9b8b>] scsi_eh_offline_sdevs +0x49/0x5e [scsi_mod] "lsusb" returns nothing (hangs) [EMAIL PROTECTED] ~]# lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03)00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03) 00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) 00:09.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 43) 00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06) 01:05.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
