> Nice work. I've applied all 15 of these patches, but now
> drivers/usb/host/sl811-hcd.c and drivers/usb/gadget/dummy_hcd.c have
> build errors.
Here's the sl811-hcd patch; compile-tested only,
that system doesn't have a 2.6.11 port yet. ;)
- Dave
SL811 changes getting rid of the "hcd_dev" support, using
usb_host_endpoint to hold the QH. This also eliminates the
"sl811h_req" data type. Compile-tested only!
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
--- 1.2/drivers/usb/host/sl811-hcd.c 2004-12-09 12:40:35 -08:00
+++ edited/drivers/usb/host/sl811-hcd.c 2004-12-15 19:56:06 -08:00
@@ -67,7 +67,7 @@
MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION "06 Dec 2004"
+#define DRIVER_VERSION "15 Dec 2004"
#ifndef DEBUG
@@ -314,7 +314,6 @@
static struct sl811h_ep *start(struct sl811 *sl811, u8 bank)
{
struct sl811h_ep *ep;
- struct sl811h_req *req;
struct urb *urb;
int fclock;
u8 control;
@@ -348,13 +347,12 @@
struct sl811h_ep, schedule);
}
- if (unlikely(list_empty(&ep->queue))) {
+ if (unlikely(list_empty(&ep->hep->urb_list))) {
DBG("empty %p queue?\n", ep);
return NULL;
}
- req = container_of(ep->queue.next, struct sl811h_req, queue);
- urb = req->urb;
+ urb = container_of(ep->hep->urb_list.next, struct urb, urb_list);
control = ep->defctrl;
/* if this frame doesn't have enough time left to transfer this
@@ -432,17 +430,12 @@
static void finish_request(
struct sl811 *sl811,
struct sl811h_ep *ep,
- struct sl811h_req *req,
+ struct urb *urb,
struct pt_regs *regs,
int status
) __releases(sl811->lock) __acquires(sl811->lock)
{
unsigned i;
- struct urb *urb = req->urb;
-
- list_del(&req->queue);
- kfree(req);
- urb->hcpriv = NULL;
if (usb_pipecontrol(urb->pipe))
ep->nextpid = USB_PID_SETUP;
@@ -457,7 +450,7 @@
spin_lock(&sl811->lock);
/* leave active endpoints in the schedule */
- if (!list_empty(&ep->queue))
+ if (!list_empty(&ep->hep->urb_list))
return;
/* async deschedule? */
@@ -496,7 +489,6 @@
done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank, struct pt_regs *regs)
{
u8 status;
- struct sl811h_req *req;
struct urb *urb;
int urbstat = -EINPROGRESS;
@@ -505,8 +497,7 @@
status = sl811_read(sl811, bank + SL11H_PKTSTATREG);
- req = container_of(ep->queue.next, struct sl811h_req, queue);
- urb = req->urb;
+ urb = container_of(ep->hep->urb_list.next, struct urb, urb_list);
/* we can safely ignore NAKs */
if (status & SL11H_STATMASK_NAK) {
@@ -577,7 +568,7 @@
urb->status = urbstat;
spin_unlock(&urb->lock);
- req = NULL;
+ urb = NULL;
ep->nextpid = USB_PID_ACK;
}
break;
@@ -618,9 +609,8 @@
bank, status, ep, urbstat);
}
- if ((urbstat != -EINPROGRESS || urb->status != -EINPROGRESS)
- && req)
- finish_request(sl811, ep, req, regs, urbstat);
+ if (urb && (urbstat != -EINPROGRESS || urb->status != -EINPROGRESS))
+ finish_request(sl811, ep, urb, regs, urbstat);
}
static inline u8 checkdone(struct sl811 *sl811)
@@ -643,7 +633,7 @@
ctl = sl811_read(sl811, SL811_EP_B(SL11H_HOSTCTLREG));
if (ctl & SL11H_HCTLMASK_ARM)
sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
- DBG("%s DONE_B: ctrl %02x sts %02x\n", ctl,
+ DBG("%s DONE_B: ctrl %02x sts %02x\n",
(ctl & SL11H_HCTLMASK_ARM) ? "timeout" : "lost",
ctl,
sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG)));
@@ -732,8 +722,8 @@
if (sl811->active_a) {
sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
finish_request(sl811, sl811->active_a,
- container_of(sl811->active_a->queue.next,
- struct sl811h_req, queue),
+ container_of(sl811->active_a->hep->urb_list.next,
+ struct urb, urb_list),
NULL, -ESHUTDOWN);
sl811->active_a = NULL;
}
@@ -741,8 +731,8 @@
if (sl811->active_b) {
sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
finish_request(sl811, sl811->active_b,
- container_of(sl811->active_b->queue.next,
- struct sl811h_req, queue),
+ container_of(sl811->active_b->hep->urb_list.next,
+ struct urb, urb_list),
NULL, -ESHUTDOWN);
sl811->active_b = NULL;
}
@@ -816,19 +806,18 @@
/*-------------------------------------------------------------------------*/
static int sl811h_urb_enqueue(
- struct usb_hcd *hcd,
- struct urb *urb,
- int mem_flags
+ struct usb_hcd *hcd,
+ struct usb_host_endpoint *hep,
+ struct urb *urb,
+ int mem_flags
) {
struct sl811 *sl811 = hcd_to_sl811(hcd);
struct usb_device *udev = urb->dev;
- struct hcd_dev *hdev = (struct hcd_dev *) udev->hcpriv;
unsigned int pipe = urb->pipe;
int is_out = !usb_pipein(pipe);
int type = usb_pipetype(pipe);
int epnum = usb_pipeendpoint(pipe);
struct sl811h_ep *ep = NULL;
- struct sl811h_req *req;
unsigned long flags;
int i;
int retval = 0;
@@ -838,16 +827,8 @@
return -ENOSPC;
#endif
- /* avoid all allocations within spinlocks: request or endpoint */
- urb->hcpriv = req = kmalloc(sizeof *req, mem_flags);
- if (!req)
- return -ENOMEM;
- req->urb = urb;
-
- i = epnum << 1;
- if (i && is_out)
- i |= 1;
- if (!hdev->ep[i])
+ /* avoid all allocations within spinlocks */
+ if (!hep->hcpriv)
ep = kcalloc(1, sizeof *ep, mem_flags);
spin_lock_irqsave(&sl811->lock, flags);
@@ -859,15 +840,14 @@
goto fail;
}
- if (hdev->ep[i]) {
+ if (hep->hcpriv) {
kfree(ep);
- ep = hdev->ep[i];
+ ep = hep->hcpriv;
} else if (!ep) {
retval = -ENOMEM;
goto fail;
} else {
- INIT_LIST_HEAD(&ep->queue);
INIT_LIST_HEAD(&ep->schedule);
ep->udev = usb_get_dev(udev);
ep->epnum = epnum;
@@ -911,7 +891,7 @@
break;
}
- hdev->ep[i] = ep;
+ hep->hcpriv = ep;
}
/* maybe put endpoint into schedule */
@@ -966,47 +946,38 @@
spin_lock(&urb->lock);
if (urb->status != -EINPROGRESS) {
spin_unlock(&urb->lock);
- finish_request(sl811, ep, req, NULL, 0);
- req = NULL;
+ finish_request(sl811, ep, urb, NULL, 0);
retval = 0;
goto fail;
}
- list_add_tail(&req->queue, &ep->queue);
+ urb->hcpriv = hep;
spin_unlock(&urb->lock);
start_transfer(sl811);
sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
fail:
spin_unlock_irqrestore(&sl811->lock, flags);
- if (retval)
- kfree(req);
return retval;
}
static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
{
struct sl811 *sl811 = hcd_to_sl811(hcd);
- struct usb_device *udev = urb->dev;
- struct hcd_dev *hdev = (struct hcd_dev *) udev->hcpriv;
- unsigned int pipe = urb->pipe;
- int is_out = !usb_pipein(pipe);
+ struct usb_host_endpoint *hep = urb->hcpriv;
unsigned long flags;
- unsigned i;
struct sl811h_ep *ep;
- struct sl811h_req *req = urb->hcpriv;
int retval = 0;
- i = usb_pipeendpoint(pipe) << 1;
- if (i && is_out)
- i |= 1;
+ if (!hep)
+ return -EINVAL;
spin_lock_irqsave(&sl811->lock, flags);
- ep = hdev->ep[i];
+ ep = hep->hcpriv;
if (ep) {
/* finish right away if this urb can't be active ...
* note that some drivers wrongly expect delays
*/
- if (ep->queue.next != &req->queue) {
+ if (ep->hep->urb_list.next != &urb->urb_list) {
/* not front of queue? never active */
/* for active transfers, we expect an IRQ */
@@ -1022,7 +993,7 @@
0);
sl811->active_a = NULL;
} else
- req = NULL;
+ urb = NULL;
#ifdef USE_B
} else if (sl811->active_b == ep) {
if (time_before_eq(sl811->jiffies_a, jiffies)) {
@@ -1036,14 +1007,14 @@
0);
sl811->active_b = NULL;
} else
- req = NULL;
+ urb = NULL;
#endif
} else {
/* front of queue for inactive endpoint */
}
- if (req)
- finish_request(sl811, ep, req, NULL, 0);
+ if (urb)
+ finish_request(sl811, ep, urb, NULL, 0);
else
VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
(sl811->active_a == ep) ? "A" : "B");
@@ -1054,33 +1025,22 @@
}
static void
-sl811h_endpoint_disable(struct usb_hcd *hcd, struct hcd_dev *hdev, int epnum)
+sl811h_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep)
{
- struct sl811 *sl811 = hcd_to_sl811(hcd);
- struct sl811h_ep *ep;
- unsigned long flags;
- int i;
-
- i = (epnum & 0xf) << 1;
- if (epnum && !(epnum & USB_DIR_IN))
- i |= 1;
-
- spin_lock_irqsave(&sl811->lock, flags);
- ep = hdev->ep[i];
- hdev->ep[i] = NULL;
- spin_unlock_irqrestore(&sl811->lock, flags);
+ struct sl811h_ep *ep = hep->hcpriv;
- if (ep) {
- /* assume we'd just wait for the irq */
- if (!list_empty(&ep->queue))
- msleep(3);
- if (!list_empty(&ep->queue))
- WARN("ep %p not empty?\n", ep);
+ if (!ep)
+ return;
- usb_put_dev(ep->udev);
- kfree(ep);
- }
- return;
+ /* assume we'd just wait for the irq */
+ if (!list_empty(&hep->urb_list))
+ msleep(3);
+ if (!list_empty(&hep->urb_list))
+ WARN("ep %p not empty?\n", ep);
+
+ usb_put_dev(ep->udev);
+ kfree(ep);
+ hep->hcpriv = 0;
}
static int
@@ -1481,7 +1441,7 @@
sl811_read(sl811, SL811_EP_B(SL11H_PKTSTATREG)));
seq_printf(s, "\n");
list_for_each_entry (ep, &sl811->async, schedule) {
- struct sl811h_req *req;
+ struct urb *urb;
seq_printf(s, "%s%sqh%p, ep%d%s, maxpacket %d"
" nak %d err %d\n",
@@ -1497,10 +1457,10 @@
}; s;}),
ep->maxpacket,
ep->nak_count, ep->error_count);
- list_for_each_entry (req, &ep->queue, queue) {
- seq_printf(s, " urb%p, %d/%d\n", req->urb,
- req->urb->actual_length,
- req->urb->transfer_buffer_length);
+ list_for_each_entry (urb, &ep->hep->urb_list, urb_list) {
+ seq_printf(s, " urb%p, %d/%d\n", urb,
+ urb->actual_length,
+ urb->transfer_buffer_length);
}
}
if (!list_empty(&sl811->async))
@@ -1743,11 +1703,6 @@
sl811->hcd.self.op = &usb_hcd_operations;
sl811->hcd.self.hcpriv = sl811;
- // NOTE: 2.6.11 starts to change the hcd glue layer some more,
- // eventually letting us eliminate struct sl811h_req and a
- // lot of the boilerplate code here
-
- INIT_LIST_HEAD(&sl811->hcd.dev_list);
sl811->hcd.self.release = &usb_hcd_release;
sl811->hcd.description = sl811h_hc_driver.description;
--- 1.1/drivers/usb/host/sl811.h 2004-12-06 10:45:04 -08:00
+++ edited/drivers/usb/host/sl811.h 2004-12-15 20:03:54 -08:00
@@ -162,7 +162,7 @@
}
struct sl811h_ep {
- struct list_head queue;
+ struct usb_host_endpoint *hep;
struct usb_device *udev;
u8 defctrl;
@@ -182,14 +182,6 @@
/* async schedule */
struct list_head schedule;
-};
-
-struct sl811h_req {
- /* FIXME usbcore should maintain endpoints' urb queues
- * directly in 'struct usb_host_endpoint'
- */
- struct urb *urb;
- struct list_head queue;
};
/*-------------------------------------------------------------------------*/
