On Fri, 24 Dec 2004, Joe Bloggs wrote: > False alarm :( While the burns complete, the DVDs > produced are all unreadable. I've tried both the old > drive and the replacement and the same happens. They > both have different firmware btw. > > All I did was comment out the if statement before the > udelay() so as to make it always happen.
At this point it sounds like the USB transport is working correctly and the data is going to/from the burner okay. It may be that the DVDs end up unreadable because of some error in the way the DVD-writer application is used. Check your system log for error messages from usb-storage. If there aren't any, and the device indicates that the data transfers are all working well, then I don't see what more can be fixed (at this level, anyway). Alan Stern ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
