Am Dienstag, 4. Januar 2005 00:23 schrieb Pavel Machek:
> Hi!
>
> > > > with 2.6.10 (i386/UP/UHCI)
> > > > 0000:00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
> > > > 0000:00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
> > > > 0000:00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
> > > > 0000:00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
> > > >
> > > > my mouse will not work after resumption. Replugging will fix it.
> > >
> > > There's known problem with APIC not being initialized properly. Can
> > > you try pci=routeirq, and noapic if that fails.
> >
> > I've tried pci=routeirq. It makes no difference.
> > During boot the kernel does recognise the device and assigns it address 2.
> >
> > How could an irq routing problem explain it? I don't unload the modules
> > as I am using a static kernel.
>
> Okay, it is probably different problem (and looks like usb
> problem). It worked ok in 2.6.9, right?
I don't know. This laptop is quite new.
Noapic doesn't work.
> [Well, I always had to replug my usb-bluetooth dongle...
Are you using a modular USB?
Regards
Oliver
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
