Greg and company, As some of you probably know, I do the support for the sq905 cameras in libgphoto2.
Just after Christmas, someone reported a new sq905 camera, saying that it did not work. The log file showed the problem was that data sent from the camera on the bulk pipe seems to get dropped: > 1. what kind of board do you have? PCChips M599LMR, which is has a k6-2 400 w/ 384 MiB RAM, and PC100 front-side bus (some googling by me finds that this board has an SIS 530/5595 chipset) I suspected a problem with the board because it transmits the control sequences for the camera just fine but most of the data gets dropped. Becoming convinced of this at least as a possibility, the owner tried dropping back from 2.6.8 to 2.4.27 and found that the problem was solved thereby. Says the problem also affects his scanner, and the solution is the same. I do not know if this is already a known problem. If it is not, I am hopeful that the owner might be willing to do some further testing. Me, I find it interesting that he says 2.4.27 works for him with his camera and his scanner, and 2.6.8 does not, though I do not claim to know the reasons why that might be the case. Theodore Kilgore ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
