Am Donnerstag, 6. Januar 2005 23:27 schrieb Alan Stern: > Do you have Legacy USB support enabled in your BIOS?
Without legacy support: Jan 7 00:35:15 macbeth kernel: Stopping tasks: =======================================| Jan 7 00:35:15 macbeth kernel: Freeing memory... ^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^Hdone (16695 pages freed) Jan 7 00:35:15 macbeth kernel: usb 1-1: no poweroff yet, suspending instead Jan 7 00:35:15 macbeth kernel: usb 1-1: usb suspend Jan 7 00:35:15 macbeth kernel: usb usb4: no poweroff yet, suspending instead Jan 7 00:35:15 macbeth kernel: Port is 5. t1 is 00001000 Jan 7 00:35:15 macbeth kernel: Port is 4. t1 is 00001000 Jan 7 00:35:15 macbeth kernel: Port is 3. t1 is 00001000 Jan 7 00:35:15 macbeth kernel: Port is 2. t1 is 00001000 Jan 7 00:35:15 macbeth kernel: Port is 1. t1 is 00001000 Jan 7 00:35:15 macbeth kernel: Port is 0. t1 is 00003002 Jan 7 00:35:15 macbeth kernel: usb usb3: no poweroff yet, suspending instead Jan 7 00:35:15 macbeth kernel: usb usb2: no poweroff yet, suspending instead Jan 7 00:35:15 macbeth kernel: usb usb1: no poweroff yet, suspending instead Jan 7 00:35:15 macbeth kernel: radeonfb: suspending to state: 3... Jan 7 00:35:15 macbeth kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. Jan 7 00:35:15 macbeth kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode Jan 7 00:35:15 macbeth kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: --> PCI D3hot Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.2: suspend_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.2: --> PCI D0/legacy Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.1: suspend_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.1: --> PCI D0/legacy Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: suspend_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: --> PCI D0/legacy Jan 7 00:35:15 macbeth kernel: swsusp: Need to copy 10604 pages Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: resume from PCI D0 (legacy) Jan 7 00:35:15 macbeth kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.1: resume from PCI D0 (legacy) Jan 7 00:35:15 macbeth kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.2: resume from PCI D0 (legacy) Jan 7 00:35:15 macbeth kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: resume from PCI D3hot Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: capability 0001 at 68 Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jan 7 00:35:15 macbeth kernel: PCI: cache line size of 32 is not supported by device 0000:00:1d.7 Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: USB 2.0 restarted, EHCI 1.00, driver 26 Oct 2004 Jan 7 00:35:15 macbeth kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 Jan 7 00:35:15 macbeth kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 Jan 7 00:35:15 macbeth kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64 Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: wakeup_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.1: wakeup_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.2: wakeup_hc Jan 7 00:35:15 macbeth kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 Jan 7 00:35:15 macbeth kernel: PCI: Setting latency timer of device 0000:00:1f.6 to 64 Jan 7 00:35:15 macbeth kernel: radeonfb: resumed ! Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: port 1 portsc 108a,02 Jan 7 00:35:15 macbeth kernel: ehci_hcd 0000:00:1d.7: resume root hub Jan 7 00:35:15 macbeth kernel: Port: 5, Status: 00001000 Jan 7 00:35:15 macbeth kernel: Port: 4, Status: 00001000 Jan 7 00:35:15 macbeth kernel: Port: 3, Status: 00001000 Jan 7 00:35:15 macbeth kernel: Port: 2, Status: 00001000 Jan 7 00:35:15 macbeth kernel: Port: 1, Status: 00001000 Jan 7 00:35:15 macbeth kernel: Port: 0, Status: 00001403 Jan 7 00:35:15 macbeth kernel: 2nd loop - Port: 5, Status: 00001000 Jan 7 00:35:15 macbeth kernel: 2nd loop - Port: 4, Status: 00001000 Jan 7 00:35:15 macbeth kernel: 2nd loop - Port: 3, Status: 00001000 Jan 7 00:35:15 macbeth kernel: 2nd loop - Port: 2, Status: 00001000 Jan 7 00:35:15 macbeth kernel: 2nd loop - Port: 1, Status: 00001000 Jan 7 00:35:15 macbeth kernel: 2nd loop - Port: 0, Status: 00001401 Jan 7 00:35:15 macbeth kernel: usb 1-1: RESUME Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: port 1 portsc 008a,01 Jan 7 00:35:15 macbeth kernel: hub 1-0:1.0: port 1 status 0007.0100 after resume, 0 Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: suspend_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.1: suspend_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.2: suspend_hc Jan 7 00:35:15 macbeth kernel: Restarting tasks... done Jan 7 00:35:15 macbeth kernel: hub 1-0:1.0: state 5 ports 2 chg fffc evt ffff Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: port 1 portsc 008a,01 Jan 7 00:35:15 macbeth kernel: usb 1-1: RESUME (wakeup) Jan 7 00:35:15 macbeth kernel: usb 1-1: usb resume Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: wakeup_hc Jan 7 00:35:15 macbeth kernel: uhci_hcd 0000:00:1d.0: uhci_result_control: failed with status 440000 Jan 7 00:35:15 macbeth kernel: [dfc5f240] link (1fc5f1b2) element (1fc7d000) Jan 7 00:35:15 macbeth kernel: 0: [dfc7d000] link (1fc7d040) e0 LS Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=1fcd8d60) Jan 7 00:35:15 macbeth kernel: 1: [dfc7d040] link (1fc7d080) e3 SPD LS Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=3, PID=69(IN) (buf=1f8be720) Jan 7 00:35:15 macbeth kernel: 2: [dfc7d080] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3, PID=e1(OUT) (buf=00000000) Jan 7 00:35:15 macbeth kernel: Jan 7 00:35:15 macbeth kernel: usb 1-1: gone after usb resume? status -71 Jan 7 00:35:15 macbeth kernel: hub 1-0:1.0: resume on port 1, status -71 Jan 7 00:35:15 macbeth kernel: hub 1-0:1.0: port 1, status 0100, change 0007, 12 Mb/s Jan 7 00:35:15 macbeth kernel: usb 1-1: USB disconnect, address 3 Jan 7 00:35:15 macbeth kernel: usb 1-1: usb_disable_device nuking all URBs Jan 7 00:35:15 macbeth kernel: usb 1-1: unregistering interface 1-1:1.0 Jan 7 00:35:15 macbeth kernel: usb 1-1:1.0: hotplug Jan 7 00:35:15 macbeth kernel: usb 1-1: unregistering device Jan 7 00:35:15 macbeth kernel: usb 1-1: hotplug Jan 7 00:35:15 macbeth kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jan 7 00:35:15 macbeth kernel: hub 2-0:1.0: state 5 ports 2 chg fffc evt ffff Jan 7 00:35:15 macbeth kernel: hub 3-0:1.0: state 5 ports 2 chg fffc evt ffff Jan 7 00:35:15 macbeth kernel: hub 4-0:1.0: state 5 ports 6 chg ffc0 evt ffff Jan 7 00:35:17 macbeth kernel: uhci_hcd 0000:00:1d.0: suspend_hc Jan 7 00:35:17 macbeth /etc/hotplug/usb.agent[11703]: need a device for this command Jan 7 00:35:18 macbeth kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex Jan 7 00:35:18 macbeth ifup: No configuration found for irlan0 Jan 7 00:35:19 macbeth smpppd[12044]: smpppd version 1.16 started Jan 7 00:35:29 macbeth kernel: eth0: no IPv6 routers present Jan 7 00:35:49 macbeth kernel: hub 4-0:1.0: state 5 ports 6 chg ffc0 evt 0002 Jan 7 00:35:49 macbeth kernel: ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001002 POWER sig=se0 CSC Jan 7 00:35:49 macbeth kernel: hub 4-0:1.0: port 1, status 0100, change 0001, 12 Mb/s Jan 7 00:35:49 macbeth kernel: hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jan 7 00:35:51 macbeth kernel: hub 4-0:1.0: state 5 ports 6 chg ffc0 evt 0002 Jan 7 00:35:51 macbeth kernel: ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT Jan 7 00:35:51 macbeth kernel: hub 4-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Jan 7 00:35:51 macbeth kernel: hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Jan 7 00:35:51 macbeth kernel: ehci_hcd 0000:00:1d.7: port 1 low speed --> companion Jan 7 00:35:51 macbeth kernel: ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC Jan 7 00:35:51 macbeth kernel: hub 1-0:1.0: state 5 ports 2 chg fffc evt 0002 Jan 7 00:35:51 macbeth kernel: uhci_hcd 0000:00:1d.0: port 1 portsc 0183,00 Jan 7 00:35:51 macbeth kernel: hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s Jan 7 00:35:51 macbeth kernel: uhci_hcd 0000:00:1d.0: wakeup_hc Jan 7 00:35:51 macbeth kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301 Jan 7 00:35:51 macbeth kernel: usb 1-1: new low speed USB device using uhci_hcd and address 4 Jan 7 00:35:51 macbeth kernel: usb 1-1: skipped 1 descriptor after interface Jan 7 00:35:51 macbeth kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Jan 7 00:35:51 macbeth kernel: usb 1-1: default language 0x0409 Jan 7 00:35:51 macbeth kernel: usb 1-1: Product: Microsoft IntelliMouse® Explorer Jan 7 00:35:51 macbeth kernel: usb 1-1: Manufacturer: Microsoft Jan 7 00:35:51 macbeth kernel: usb 1-1: hotplug Jan 7 00:35:51 macbeth kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0) Jan 7 00:35:51 macbeth kernel: usb 1-1:1.0: hotplug Jan 7 00:35:51 macbeth kernel: usbhid 1-1:1.0: usb_probe_interface Jan 7 00:35:51 macbeth kernel: usbhid 1-1:1.0: usb_probe_interface - got id Jan 7 00:35:51 macbeth /etc/hotplug/usb.agent[12397]: need a device for this command Jan 7 00:35:51 macbeth kernel: input: USB HID v1.11 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.0-1 Jan 7 00:35:51 macbeth kernel: hub 1-0:1.0: state 5 ports 2 chg fffc evt 0002 ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
