Begin forwarded message:
Date: Wed, 12 Jan 2005 04:15:22 -0800 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Bugme-new] [Bug 4024] New: fault to mount usb storage http://bugme.osdl.org/show_bug.cgi?id=4024 Summary: fault to mount usb storage Kernel Version: 2.6.10-mm3 Status: NEW Severity: high Owner: [EMAIL PROTECTED] Submitter: [EMAIL PROTECTED] Distribution:Debian Sarge Hardware Environment: usb2ide adapter Genesys Logic + HDD HITACI DK221A-34 (200 MB) Software Environment:mount-2.12p Problem Description: I have 2.5 hdd with two partitions primary and logigal it's work if attached direckt to ide, but dusn't if thrue usb2ide adapter with message: usb 1-1: new full speed USB device using uhci_hcd and address 4 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: HITACHI_ Model: DK221A-34 Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete sda: too big for this kernel. Use a kernel compiled with support for large block devices. SCSI device sda: 0 512-byte hdwr sectors (0 MB) sda: assuming drive cache: write through Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 But this is only 200 MB hdd. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
