I'm getting the impression that using the MPC880s internal USB support might not be such a good idea. Are there external USB host controllers that interface easily to an MPC8xx processor and have Linux support?
Dean Dayton > -----Original Message----- > From: Steve Calfee [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 18, 2005 12:41 PM > To: [email protected]; Dayton, Dean > Subject: Re: [linux-usb-devel] USB host on Freescale MPC880 > > > >At 08:32 AM 1/18/2005 -0500, Dayton, Dean wrote: > >I need to provide a USB host interface on a propietary board using a > >Freescale (Motorola) MPC880. The MPC880 has a USB implemented in the > >CPM, but I haven't found any Linux support for it. Can > anyone point me > >to existing drivers? Does anyone know of any problems that > would/should > >prevent me from using the MPC880's USB interface? > > >Thanks > > >------------- Dean Dayton Staff Engineer - Applied Innovation Inc. > >(614)923-1174 [EMAIL PROTECTED] > > Hi, unless the 880 is much different than the 823 and 850 you > will have many > troubles. Search this list archive for mails containing all > "823 850 host > driver" and you should get an idea of the problems ahead of you. > > Regards, ~Steve > > > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
