On Thu, 20 Jan 2005, Philipp Schmid wrote:

> The only non-porting changes (from 2.6.6 - I can't upgrade because of
> customer requirements ...) are the following.  As isp116x_write_data16() is
> already correctly swapping bytes for big/little endian, but the PTD payload
> is a byte stream, I needed to flip the data again except for some last-byte
> cases in write_ptddata_to_fifo() and read_ptddata_from_fifo():

Thanks. Without your help, I probably couldn't get it
right.

> practical for me).  I did run this for a longer time earlier and something
> happened to trigger the chip to reset the bus and re-enumerate.
> Unfortunately, I didn't capture the details, but it had the same error
> message you are looking into already.  I will continue to let this run and
> see if it happens again.

Failure logs are welcome. If you'll capture the log with
PTD dumps in the future, please enable also the urb tracing
(URB_TRACE macro).

Olav



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to