This adds the PPC bus glue needed by the OHCI driver core.

- Dave
This adds drivers/usb/host/ohci-ppc-soc.c, the USB OHCI glue file
for two PPC SOC implementations.

Signed-off-by: Dale Farnsworth <[EMAIL PROTECTED]>
Signed-off-by: David Brownell <[EMAIL PROTECTED]>


--- 1.85/drivers/usb/host/ohci-hcd.c	2005-01-05 13:21:53 -07:00
+++ edited/drivers/usb/host/ohci-hcd.c	2005-01-25 12:25:48 -07:00
@@ -897,11 +897,16 @@
 #include "ohci-pxa27x.c"
 #endif
 
+#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
+#include "ohci-ppc-soc.c"
+#endif
+
 #if !(defined(CONFIG_PCI) \
       || defined(CONFIG_SA1111) \
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
+      || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
 	)
 #error "missing bus glue for ohci-hcd"
 #endif
--- /dev/null	Wed Dec 31 16:00:00 196900
+++ b/drivers/usb/host/ohci-ppc-soc.c	2005-01-25 14:17:10 -07:00
@@ -0,0 +1,299 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <[EMAIL PROTECTED]>
+ * (C) Copyright 2000-2002 David Brownell <[EMAIL PROTECTED]>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2003-2005 MontaVista Software Inc.
+ * 
+ * Bus Glue for PPC On-Chip OHCI driver
+ * Tested on Freescale MPC5200 and IBM STB04xxx
+ *
+ * Modified by Dale Farnsworth <[EMAIL PROTECTED]> from ohci-sa1111.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <asm/usb.h>
+
+static void usb_hcd_ppc_soc_remove(struct usb_hcd *, struct platform_device *);
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+/**
+ * usb_hcd_ppc_soc_probe - initialize On-Chip HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ * Store this function in the HCD's struct pci_driver as probe().
+ */
+static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
+			  struct usb_hcd **hcd_out,
+			  struct platform_device *pdev)
+{
+	int retval;
+	struct usb_hcd *hcd = 0;
+	struct ohci_hcd	*ohci;
+	struct resource *res;
+	int irq;
+	struct usb_hcd_platform_data *pd = pdev->dev.platform_data;
+
+	pr_debug("initializing PPC-SOC USB Controller\n");
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		pr_debug(__FILE__ ": no irq\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		pr_debug(__FILE__ ": no reg addr\n");
+		return -ENODEV;
+	}
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+					hcd_name)) {
+		pr_debug(__FILE__ ": request_mem_region failed\n");
+		return -EBUSY;
+	}
+
+	if (pd->start && (retval = pd->start(pdev)))
+		goto err0;
+
+	hcd = usb_create_hcd(driver);
+	if (!hcd){
+		pr_debug(__FILE__ ": hcd_alloc failed\n");
+		retval = -ENOMEM;
+		goto err1;
+	}
+
+	ohci = hcd_to_ohci(hcd);
+
+	ohci->flags |= OHCI_BIG_ENDIAN;
+
+	ohci_hcd_init(ohci);
+
+	hcd->irq = irq;
+	hcd->regs = (struct ohci_regs *) ioremap(res->start,
+						res->end - res->start + 1);
+	if (!hcd->regs) {
+		pr_debug(__FILE__ ": ioremap failed\n");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	hcd->self.controller = &pdev->dev;
+
+	retval = hcd_buffer_create(hcd);
+	if (retval) {
+		pr_debug(__FILE__ ": pool alloc fail\n");
+		goto err3;
+	}
+
+	retval = request_irq(hcd->irq, usb_hcd_irq, SA_INTERRUPT,
+				hcd_name, hcd);
+	if (retval) {
+		pr_debug(__FILE__ ": request_irq failed, returned %d\n",
+								retval);
+		retval = -EBUSY;
+		goto err4;
+	}
+
+	info("%s (PPC-SOC) at 0x%p, irq %d\n",
+	      hcd_name, hcd->regs, hcd->irq);
+
+	hcd->self.bus_name = "PPC-SOC USB";
+
+	usb_register_bus(&hcd->self);
+
+	if ((retval = driver->start(hcd)) < 0) {
+		usb_hcd_ppc_soc_remove(hcd, pdev);
+		return retval;
+	}
+
+	*hcd_out = hcd;
+	return 0;
+
+ err4:
+	hcd_buffer_destroy(hcd);
+ err3:
+	iounmap(hcd->regs);
+ err2:
+	dev_set_drvdata(&pdev->dev, NULL);
+ 	usb_put_hcd(hcd);
+ err1:
+	pr_debug("Removing PPC-SOC USB Controller\n");
+	if (pd && pd->stop)
+		pd->stop(pdev);
+ err0:
+	release_mem_region(res->start, res->end - res->start + 1);
+	return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_ppc_soc_remove - shutdown processing for On-Chip HCDs
+ * @pdev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_ppc_soc_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ */
+static void usb_hcd_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+{
+	struct resource *res;
+	struct usb_hcd_platform_data *pd = pdev->dev.platform_data;
+
+	pr_debug(__FILE__ ": remove: %s, state %x\n", hcd->self.bus_name,
+								hcd->state);
+	if (in_interrupt())
+		BUG();
+
+	hcd->state = USB_STATE_QUIESCING;
+
+	pr_debug("%s: roothub graceful disconnect\n", hcd->self.bus_name);
+	usb_disconnect(&hcd->self.root_hub);
+
+	hcd->driver->stop(hcd);
+	hcd->state = USB_STATE_HALT;
+
+	free_irq(hcd->irq, hcd);
+	hcd_buffer_destroy(hcd);
+
+	usb_deregister_bus(&hcd->self);
+
+	iounmap(hcd->regs);
+	kfree(hcd);
+
+	pr_debug("stopping PPC-SOC USB Controller\n");
+
+	if (pd && pd->stop)
+		pd->stop(pdev);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+}
+
+static int __devinit
+ohci_ppc_soc_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int		ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		err("can't start %s", ohci_to_hcd(ohci)->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver ohci_ppc_soc_hc_driver = {
+	.description =		hcd_name,
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		ohci_ppc_soc_start,
+	.stop =			ohci_stop,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_USB_SUSPEND
+	.hub_suspend =		ohci_hub_suspend,
+	.hub_resume =		ohci_hub_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+static int ohci_hcd_ppc_soc_drv_probe(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct usb_hcd *hcd = NULL;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	ret = usb_hcd_ppc_soc_probe(&ohci_ppc_soc_hc_driver, &hcd, pdev);
+
+	if (ret == 0)
+		dev_set_drvdata(dev, hcd);
+
+	return ret;
+}
+
+static int ohci_hcd_ppc_soc_drv_remove(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	usb_hcd_ppc_soc_remove(hcd, pdev);
+
+	dev_set_drvdata(dev, NULL);
+	return 0;
+}
+
+static struct device_driver ohci_hcd_ppc_soc_driver = {
+	.name		= "ppc-soc-ohci",
+	.bus		= &platform_bus_type,
+	.probe		= ohci_hcd_ppc_soc_drv_probe,
+	.remove		= ohci_hcd_ppc_soc_drv_remove,
+#if	defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+	/*.suspend	= ohci_hcd_ppc_soc_drv_suspend,*/
+	/*.resume	= ohci_hcd_ppc_soc_drv_resume,*/
+#endif
+};
+
+static int __init ohci_hcd_ppc_soc_init(void)
+{
+	pr_debug(DRIVER_INFO " (PPC SOC)\n");
+	pr_debug("block sizes: ed %d td %d\n", sizeof(struct ed),
+							sizeof(struct td));
+
+	return driver_register(&ohci_hcd_ppc_soc_driver);
+}
+
+static void __exit ohci_hcd_ppc_soc_cleanup(void)
+{
+	driver_unregister(&ohci_hcd_ppc_soc_driver);
+}
+
+module_init(ohci_hcd_ppc_soc_init);
+module_exit(ohci_hcd_ppc_soc_cleanup);

Reply via email to