No luck with remote console (no serial - its a laptop and I couldn't get netconsole to work yet.) In case it might help someone - I worked around the problem for now by modifying FC3 rc.sysinit/local to load usb-storage later.
Also, I see another strange thing with usb-storage -It prints the below message twice in dmesg. Never seen that.. SCSI device sdb: 398295040 512-byte hdwr sectors (203927 MB) sdb: assuming drive cache: write through SCSI device sdb: 398295040 512-byte hdwr sectors (203927 MB) sdb: assuming drive cache: write through sdb: sdb1 sdb2 Parag On Mon, 2005-02-07 at 14:34 -0500, Alan Stern wrote: > On Mon, 7 Feb 2005, Parag Warudkar wrote: > > > As I said the hang lasts for about couple of minutes. I can't tell from > > log where it happens since there are no time stamps in the log, but it > > happens when FC3 is "Initializing Hardware..." in rc.sysinit and it > > loads storage, network and audio - right after loading audio if the usb- > > storage drive is connected, the machine hangs (no response whatsoever) > > there for couple of minutes after which it resumes normal boot. > > > > So the boot-up is normal except for the 2 minute annoying hang. > > > > If there is a way to get timestamps in the boot-up log may be we will > > have clear picture where the hang is - I will try adding timestamps to > > usb-storage debug and see if that helps. > > Another option is to boot with a serial or network console, so you can see > the log messages as they are written. > > Alan Stern > ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
