Hi, All !

I installed Coolmax storage box (CD-510-U2) based on Cypress CY7C68300A, and it 
works on my debian box.

I tried to use kernels 2.6.9 and 2.6.11-rc4, but device is very slow - transfer 
is about 75 kilobytes per second.
But from Windows 2000 transfer is about 1 megabyte per second.

I understand, what better solution is to use USB2.0 adapter, but I can't modify 
hardware. I want to use full USB1.1 speed from Linux.

What can I do with this beast ?

WBR, Alex.

===================================================
$ sudo lsmod
Module                  Size  Used by
ohci_hcd               20104  0
uhci_hcd               29456  0
nls_iso8859_1           4224  0
nls_cp437               5888  0
vfat                   12800  0
fat                    36764  1 vfat
nls_base                7680  4 nls_iso8859_1,nls_cp437,vfat,fat
ub                     17052  0
capability              5000  0
commoncap               6784  1 capability
eepro100               29456  0
snd_intel8x0           30528  1
snd_ac97_codec         66424  1 snd_intel8x0
snd_pcm_oss            47520  0
snd_mixer_oss          17408  1 snd_pcm_oss
snd_pcm                83976  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              23812  1 snd_pcm
snd                    50660  8 
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore              10080  1 snd
snd_page_alloc          9604  2 snd_intel8x0,snd_pcm
i2c_i801                8204  0
i2c_core               21392  1 i2c_i801
usbcore               110328  4 ohci_hcd,uhci_hcd,ub
hw_random               5652  0
parport_pc             33220  0
parport                24256  1 parport_pc
8250_pnp                8576  0
8250                   21572  1 8250_pnp
serial_core            20736  1 8250
evdev                   9088  0
e100                   33536  0
aes_i586               38912  1
dm_crypt               11528  1
dm_mod                 54012  2 dm_crypt
unix                   26676  303
===================================================
$ lsusb -t
Bus#  3
`-Dev#   1 Vendor 0x0000 Product 0x0000
  `-Dev#   2 Vendor 0x04b4 Product 0x6830
Bus#  2
`-Dev#   1 Vendor 0x0000 Product 0x0000
Bus#  1
`-Dev#   1 Vendor 0x0000 Product 0x0000
===================================================
$  cat /proc/bus/usb/devices

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc4 ohci_hcd
S:  Product=NEC Corporation USB (#2)
S:  SerialNumber=0000:02:01.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04b4 ProdID=6830 Rev= 0.01
S:  Manufacturer=Cypress Semiconductor
S:  Product=USB2.0 Storage Device
S:  SerialNumber=DEF107FA0C54
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=ub
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc4 ohci_hcd
S:  Product=NEC Corporation USB
S:  SerialNumber=0000:02:01.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.11-rc4 uhci_hcd
S:  Product=Intel Corp. 82801BA/BAM USB (Hub #1)
S:  SerialNumber=0000:00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
===================================================
$ sudo lspci -v
0000:00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge 
(MCH) (rev 04)
        Flags: bus master, fast devsel, latency 0
        Memory at f8000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 2.0

0000:00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 
04) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 32
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: fc900000-fe9fffff
        Prefetchable memory behind bridge: e4600000-f46fffff

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 04) (prog-if 00 
[Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fea00000-feafffff
        Prefetchable memory behind bridge: f4700000-f47fffff

0000:00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
        Flags: bus master, medium devsel, latency 0

0000:00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) (prog-if 80 
[Master])
        Subsystem: Intel Corp.: Unknown device 4d44
        Flags: bus master, medium devsel, latency 0
        I/O ports at ffa0 [size=16]

0000:00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04) 
(prog-if 00 [UHCI])
        Subsystem: Intel Corp.: Unknown device 4d44
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at ef80 [size=32]

0000:00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
        Subsystem: Intel Corp.: Unknown device 4d44
        Flags: medium devsel, IRQ 6
        I/O ports at efa0 [size=16]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio 
(rev 04)
        Subsystem: Intel Corp.: Unknown device 4d44
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at e800 [size=256]
        I/O ports at ef00 [size=64]

0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 
400] (rev b2) (prog-if 00 [VGA])
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at fe9f0000 [disabled] [size=64K]
        Capabilities: [60] Power Management version 2
        Capabilities: [44] AGP version 2.0

0000:02:01.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
        Subsystem: Intel Corp.: Unknown device 4d44
        Flags: bus master, medium devsel, latency 32, IRQ 19
        Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

0000:02:01.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
        Subsystem: Intel Corp.: Unknown device 4d44
        Flags: bus master, medium devsel, latency 32, IRQ 18
        Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2

0000:02:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 
0c)
        Subsystem: Intel Corp. EtherExpress PRO/100 S Desktop Adapter
        Flags: bus master, medium devsel, latency 32, IRQ 17
        Memory at feafc000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at df00 [size=64]
        Memory at feac0000 (32-bit, non-prefetchable) [size=128K]
        Expansion ROM at feae0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2



WBR, Alex.


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to