[linux-usb-devel] [PATCH] Replaces (2 * HZ) with DATA_TIMEOUT in /drivers/usb/atm/speedtch.c

[Telemaque Ndizihiwe]

This Patch replaces "(2 * HZ)" with "DATA_TIMEOUT" which is defined as
    #define DATA_TIMEOUT (2 * HZ)
in /drivers/usb/atm/speedtch.c in kernel 2.6.10.
Signed-off-by: Telemaque Ndizihiwe <[EMAIL PROTECTED]>
--- linux-2.6.10/drivers/usb/atm/speedtch.c.orig    2005-02-20 
12:44:22.235267848 +0000
+++ linux-2.6.10/drivers/usb/atm/speedtch.c    2005-02-20 
12:50:52.205983288 +0000
@@ -494,7 +494,7 @@ static void speedtch_upload_firmware(str
    /* URB 7 */
    if (dl_512_first) {    /* some modems need a read before writing 
the firmware */
        ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, 
SPEEDTCH_ENDPOINT_FIRMWARE),
-                   buffer, 0x200, &actual_length, 2 * HZ);
+                   buffer, 0x200, &actual_length, DATA_TIMEOUT);

        if (ret < 0 && ret != -ETIMEDOUT)
            dbg("speedtch_upload_firmware: read BLOCK0 from modem 
failed (%d)!", ret);

--- linux-2.6.10/drivers/usb/atm/speedtch.c.orig        2005-02-20 
12:44:22.235267848 +0000
+++ linux-2.6.10/drivers/usb/atm/speedtch.c     2005-02-20 12:50:52.205983288 
+0000
@@ -494,7 +494,7 @@ static void speedtch_upload_firmware(str
        /* URB 7 */
        if (dl_512_first) {     /* some modems need a read before writing the 
firmware */
                ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, 
SPEEDTCH_ENDPOINT_FIRMWARE),
-                                  buffer, 0x200, &actual_length, 2 * HZ);
+                                  buffer, 0x200, &actual_length, DATA_TIMEOUT);
 
                if (ret < 0 && ret != -ETIMEDOUT)
                        dbg("speedtch_upload_firmware: read BLOCK0 from modem 
failed (%d)!", ret);