On Wed, 23 Feb 2005, David Hollis wrote:
> On Wed, 2005-02-23 at 14:41 -0600, [EMAIL PROTECTED] wrote: > > Could someone give me a hint how to trouble shoot this. > > About all I can say is it doesn't work. When I plug it in the usb > > subsystem recognises the device and creates ethX. It just doesn't > > communicate. I have a 3Com card that works fine so I know the network is > > OK. I even tried assigning a static address but I still couldn't > > communicate. I expect there's a simple answer so feel free to poke fun. > > I'm running Fedora Core 2 with 2.6.10-1.14_FC2smp kernel. > > Try applying the patch from: > http://marc.theaimsgroup.com/?l=linux-usb-devel&m=110893649515777&w=2 I applied the patch you suggested to 2.6.10 and rebuilt. It didn't seem to make any difference, just no communication. I even tried 2.6.11-rc4 with the same results. > > You may also want to send the output from /sbin/mii-tool -v eth0 eth1: negotiated 100baseTx-FD, link ok product info: vendor 00:00:20, model 32 rev 1 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control I'm open to any suggestions. I just don't know where to start. Richard Ray ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
