> Odd. Presumably earlier kernels worked for you; you should > find out when it stopped working. It's possible some of the > recent updates for OSK stomped on Innovator or 1510 support. I got the same results with 2.6.11-rc1-omap1 and an old release from http://www.celinuxforum.org based on kernel 2.4 (celinux-040503)
> Let's see. Two of the three ports are accessible through OHCI, > but multiplexing for one of them interferes with UART2. So one > thing to try is using the other accessible host port. (You are > using the custom cables that came with your Innovator, I hope! > And it's possible that some boards worked better than others.) I tested on both ports and got nothing, but after analyzing some schematics i saw that the USB tranceivers (PDIUSBP11A) were not in receive mode. So the connect signal from the mouse was not reaching them. USB1_SEO and USB2_SEO connects to the OE of the tranceivers and they were both low, disabling the receive mode. Could the USB initializing be the problem? Thanks for your help. Danilo ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
