On Sun, 13 Mar 2005, Guilhem Lavaux wrote:

> Hi,
> 
> I'm currently running a vanilla 2.6.11 kernel but the problem I will 
> report was already there in 2.6.10 and was seldom appearing on 2.6.8.1.
> The problem is present both with acpi=force and acpi=off.

> Nearly whenever I boot the kernel the usb subsystem reports these messages:
>       uhci_hcd 0000:00:1d.1: UHCI Host Controller
>       usb 1-2: new full speed USB device using uhci_hcd and address 2
>       uhci_hcd 0000:00:1d.0: Unlink after no-IRQ?  Controller is probably 
> using the wrong IRQ.
>       PCI: Setting latency timer of device 0000:00:1d.1 to 64
>       uhci_hcd 0000:00:1d.1: irq 5, io base 0xe880
>       uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>       usb 1-2: khubd timed out on ep0in
>       usb 1-2: device descriptor read/64, error -110
> 
> and the peripheral is unavailable.
> 
> If I remove uhci_hcd and load it again then everything is fine
> 
>       uhci_hcd 0000:00:1d.2: UHCI Host Controller
>       PCI: Setting latency timer of device 0000:00:1d.2 to 64
>       uhci_hcd 0000:00:1d.2: irq 9, io base 0xec00
>       uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> 
> 
> and nothing else besides device detection.
> 
> However if I try to plug an USB 1 device on another bus then I get the 
> first message until I reload again the driver.
> 
> 
> Anything more you want to debug this ?  :)

Please post the complete system log for the period starting with the host 
controller initialization and including the time when you do the rmmod, 
modprobe, and plug in another low-speed device on another controller.  
Also please set CONFIG_USB_DEBUG before running the test.

Alan Stern



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to