On Thu, 17 Mar 2005, zhougoal wrote: > Hello Alan, > > Sorry to trouble you again! > > I met a question again. When I send a control message with my > isp1561 to the high speed device,the host controller will trigger a > interrupt with the status valued : 0xa018, which means a host system > error . I read the EHCI spec and found it is because some PCI error.But > I read the pci_command register ,it is ok with the busmaster and memory > space is set to one! > > So what is the error to trigger this host system error interrupt. Is > it possible that the qh and qtd structure is not in correct format?
No, that won't cause a PCI error. The error could arise if you forgot to enable the controller as a bus master. > In addition,the source forger don't receive the mails from my > 163.com's mail.Does it have some limition? Just now I registered on > OSTG,does it help? I don't know. Alan Stern ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
