On Fri, 18 Mar 2005, Sylvain Munaut wrote: > Hi > > I'm trying to use the ohci-ppc-soc.c but without success until now. I'm > only getting : > > "usb 1-1: device not accepting address 5, error -32" > > > I have a working USB with a bk snapshot around 2.6.10 but using OCP and > not platform. When updating that working tree to the current bk version, > still using the 'old' OCP driver (but adapting it to the new init, > inspired from sa1100 code), I have the same error ... > > Between my old 2.6.10 and the new one, there has been quite a few > changes and tracing why it doesn't work now is gonna be long ... If > someone has an insight where the problem might be, it would be welcomed.
There was an important 10 ms delay missing in the 2.6.10 hub driver; it could be causing your problem. The delay is present in 2.6.11. Does the device work okay when plugged into a regular computer? Alan Stern ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
