Hello,
> For Kyle: I got the drivers directly from Philips technical support. >
Thanks for the info, but I finally was able to get Philips technical support to provide me with these.
ok.
I was able to get the driver from Denx software to send bulk data much faster for a 2.4 kernel.
Great!
I could send you a copy if you would like to try it out.
Yes, sure. We can port and test it on a PPC405EP-based custom board.
Actually, I would appreciate it you would. It would then be tested on other devices to see if it is working properly. There are still a few issues I am working on, like connecting/disconnecting devices and proper hub support, but for just handling devices that are always connected to the bus, it works fine.
We experienced similar problems. I mean that the host controller was not able to detect devices that were already plugged at boot. Let me check how we solved it ... I'll be back.
Thanks and best regards,
llandre
DAVE Electronics System House - R&D Department web: http://www.dave-tech.it email: r&[EMAIL PROTECTED]
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
