-----Paulo Marques <[EMAIL PROTECTED]> wrote: ----- [EMAIL PROTECTED] wrote: >> Hello, >> >> I've try to use the module usbserial for using a POS-Lineprinter from >> EPSON. >> After I load the driver with >> modprobe usbserial vendor=0x4f8 product=0x0202 >> I can send characters to the printer. >> But I can't configure the printer by ESC sequences, because if i send the >> ASCII-Value 0x0A (LF), the printer get the ASCII-Value 0x0D (CR). I've test > >You have to make sure the port is in "raw" mode. Do: > >stty -F <device> raw > >to clear all cr-lf translations, echo, etc. > >You can also do this from inside a program using the cfmakeraw function. >See "man termios". > >I hope this helps, Yes, this helps, very thanks. >-- >Paulo Marques - www.grupopie.com >All that is necessary for the triumph of evil is that good men do nothing. >Edmund Burke (1729 - 1797) ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
