Hi,
Installing Logitech usb headset, dmesg spits out this
error.
Any idea?
Thanks,
[EMAIL PROTECTED] dmesg
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
usb-uhci.c: $Revision: 1.275 $ time 05:47:42 Dec 12
2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 02:07.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 9 for device 00:1d.2
PCI: Sharing IRQ 9 with 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xff40, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller
Interface driver
hub.c: USB new device connect on bus4/2, assigned
device number 2
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6
len 4 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000280, flags 0, urb dd0120c0,
burb dd012f40
usb.c: error getting string descriptor 0 (error=-6)
usbaudio: device 2 audiocontrol interface 0 has 1
input and 1 output AudioStreaming interfaces
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 1: format
0x00000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 2 altsetting 2: format
0x80000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: device 2 interface 1 altsetting 0 does not
have an endpoint
usbaudio: valid output sample rate 8000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: valid output sample rate 22050
usbaudio: valid output sample rate 11025
usbaudio: device 2 interface 1 altsetting 1: format
0x80000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: valid output sample rate 8000
usbaudio: valid output sample rate 48000
usbaudio: valid output sample rate 44100
usbaudio: valid output sample rate 22050
usbaudio: valid output sample rate 11025
usbaudio: device 2 interface 1 altsetting 2: format
0x00000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,19
usbaudio: constructing mixer for Terminal 6 type
0x0301
usbaudio: warning: found 2 of 1 logical channels.
usbaudio: no idea what's going on..., contact
linux-usb-devel@lists.sourceforge.net
usbaudio: registered mixer 14,16
usbaudio: constructing mixer for Terminal 11 type
0x0101
usbaudio: registered mixer 14,32
usb_audio_parsecontrol: usb_audio_state at f6b31820
usb-uhci.c: interrupt, status 3, frame# 619
input0: USB HID v1.00 Pointer [Logitech Logitech USB
Headset] on usb4:2.3
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED] lsmod | grep usb
usb-uhci 26188 0 (unused)
usbcore 77024 1 [usb-uhci audio hid
ehci-hcd]
[EMAIL PROTECTED]
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
