Am Donnerstag, 14. April 2005 06:07 schrieb [EMAIL PROTECTED]:
>
> Hi Oliver,
>
> Response should be one time and in serial communication it works fine
> and even USB it gives the same response but it's continuous. This
> command is not to trigger to send stream of message. This command is
> used for audio accessory requests ATMS and AFMS and indicates that the
> accessory wants to be activated directly if a call is established by the
> phone.
>
> Yes it fails in USB and in serial it work fine.
Ok. Which modem is it? Is it an ACM modem or are you using a serial emulation?
Please post the output of "lsusb -v".
Regards
Oliver
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
