On Friday 22 April 2005 9:34 am, craig qu wrote: > Hello all, > > After I set VT6212L USB2.0 controller into D3hot mode, > connecting/disconnecting usb drive doesn't generate > any PME# assertion.
No, it won't do any of that unless CONFIG_USB_SUSPEND is enabled. I've certainly observed the PME# bit be set in the PCI config space after forcing the HCD to put such controllers into D3hot through sysfs. But note that the whole USB wakeup mechanism happens to be marked EXPERIMENTAL. It's been tested in isolation, but not integrated with things like S1 or S3 sleep ... and the last time I tried to enable ACPI wakeup (with the /proc/acpi/wakeup file), it didn't work at all. > function 2 configuration in D3hot mode: > > 00 01 02 03 04 05 06 07 08 09 0a > 0b 0c 0d 0e 0f ... etc. FYI it's much easier to understand "lspci -vv" than the hex dump; pass "-xxx" if you like too of course. - Dave ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
