On Thu, Apr 28, 2005 at 02:02:04PM +0800, grant.kang wrote: > Hi: > I use linux-2.4.18 with pl2303 usb converter supported. I connect the USB > Serial converter with DCE Device (like modem). > When I type stty -F /dev/usb/tts/0 and display the device baudrate / termio > setting. > But , When I connect to one 4-port prolific HUB, and connect to the Host > controller(OHCI). I reset board, and type stty -F /dev/usb/tts/0, > It work fine and report baudrate/termio etc. When I type stty-F > /dev/usb/tts/0 again, I get the OHCI/ interrupt error,"Schedule overrun". > And can not stop system. > Any suggestion ???
Use a kernel that is not over 3 years old? Seriously, we have fixed a few bugs since then... I'd recommend 2.6.11.7. thanks, greg k-h ------------------------------------------------------- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
