Am Donnerstag, 28. April 2005 22:29 schrieb Roberto Roccatello:
> Hi
> I'm trying to get this "U.S. Robotics 56K Faxmodem USB" working
> with cdc-acm driver but with no results.
> I would like to know what do you think about this output:
> 
> [EMAIL PROTECTED]:~$ tail -f /var/log/messages
> usb 1-1: new full speed USB device using uhci_hcd and address 2
> drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver
> for USB modems and ISDN adapters
> 
> [EMAIL PROTECTED]:~$ cat /proc/bus/usb/devices
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
> D:  Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
> P:  Vendor=0baf ProdID=6112 Rev= 0.01
> S:  Manufacturer=U.S. Robotics
> S:  Product=U.S. Robotics 56K Faxmodem USB
> S:  SerialNumber=USBHCF00000006
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=150mA
> I:  If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> 
> It seems a Modem not supported by the cdc-acm driver.
> If it has a vendor-specific interface, is it possible and where 
> do i start writing a module by reversing its windows driver?

It doesn't look even a little related to acm.
You need to install snooping software under Windows and probably
first find out which endpoint does what.

        Regards
                Oliver


-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans!
Take this survey and enter to win a one-year sub to SourceForge.net
Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start!  http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to