Hello Stephen,
On Thu, 28 Apr 2005 14:17:35 -0700 (PDT) "Stephen J. Gowdy" <[EMAIL PROTECTED]> wrote: > The maintainer of that file is Martin Mares <[EMAIL PROTECTED]>. Here is the > top > of that file; Great, thanks! I'll push the button. Regard, > # > # List of PCI ID's > # > # Maintained by Martin Mares <[EMAIL PROTECTED]> and other volunteers > from > the > # Linux PCI ID's Project at http://pciids.sf.net/. New data are > always > # welcome (if they are accurate), we're eagerly expecting new > entries, > # so if you have anything to contribute, please visit the home page > or > # send a diff -u against the most recent pci.ids to [EMAIL PROTECTED] > > > On Thu, 28 Apr 2005, wwp wrote: > > > Hello Stephen, > > > > > > On Thu, 28 Apr 2005 10:00:46 -0700 (PDT) "Stephen J. Gowdy" > > <[EMAIL PROTECTED]> wrote: > > > > > That means there is no entry in the pci.ids file for those devices. That > > > is only used for this output I believe (lspci). > > > > I see. I just wanted to report those hardware IDs, in case it is useful. > > > > > > Regards, > > > > > On Thu, 28 Apr 2005, wwp wrote: > > > > > > > Hello there, > > > > > > > > > > > > dunno if that helps or if it's the wrong place for this.. I'm running > > > > a 2.6.11 kernel on a Dell Latitude D810 (FC3+upgrades). lspci reports > > > > unknown Dell USB devices IDs (but everything works well). > > > > > > > > Maybe someone would found interesting to get the USB devices IDs from > > > > the output below? Feel free to ask for more. > > > > > > > > > > > > lspci -vv (excerpts): > > > > > > > > 00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 > > > > Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell: > > > > Unknown device 0186 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- > > > > FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > > > > <PERR- Latency: 0 Interrupt: pin C routed to IRQ 9 > > > > Region 4: I/O ports at bf40 [size=32] > > > > > > > > 00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 > > > > Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell: > > > > Unknown device 0186 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > > > > VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- > > > > FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > > > > <PERR- Latency: 0 Interrupt: pin D routed to IRQ 5 > > > > Region 4: I/O ports at bf20 [size=32] > > > > > > > > 00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 > > > > Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: > > > > Dell: Unknown device 0186 Control: I/O- Mem+ BusMaster+ SpecCycle- > > > > MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ > > > > 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- > > > > >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 11 > > > > Region 0: Memory at ffa80800 (32-bit, non-prefetchable) > > > > [size=1K] Capabilities: [50] Power Management version 2 > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0 > > > > +,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > > Capabilities: [58] Debug port > > > > > > > > /proc/bus/usb/devices: > > > > > > > > T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > > B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0 > > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > > S: Manufacturer=Linux 2.6.11-1.14_FC3.root_cubbi1_swsusp2 uhci_hcd > > > > S: Product=UHCI Host Controller > > > > S: SerialNumber=0000:00:1d.3 > > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > > > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > > S: Manufacturer=Linux 2.6.11-1.14_FC3.root_cubbi1_swsusp2 uhci_hcd > > > > S: Product=UHCI Host Controller > > > > S: SerialNumber=0000:00:1d.2 > > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > > > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > > S: Manufacturer=Linux 2.6.11-1.14_FC3.root_cubbi1_swsusp2 uhci_hcd > > > > S: Product=UHCI Host Controller > > > > S: SerialNumber=0000:00:1d.1 > > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > > > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > > S: Manufacturer=Linux 2.6.11-1.14_FC3.root_cubbi1_swsusp2 uhci_hcd > > > > S: Product=UHCI Host Controller > > > > S: SerialNumber=0000:00:1d.0 > > > > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA > > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > > > > > > > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 > > > > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > > > > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > > > > P: Vendor=0000 ProdID=0000 Rev= 2.06 > > > > S: Manufacturer=Linux 2.6.11-1.14_FC3.root_cubbi1_swsusp2 ehci_hcd > > > > S: Product=EHCI Host Controller > > > > S: SerialNumber=0000:00:1d.7 > > > > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > > > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > > > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > > > > > > > > > > > > Regards, > > > > > > > > > > > > > > -- > > > /------------------------------------+-------------------------\ > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > \------------------------------------+-------------------------/ > > > > > > > > > ------------------------------------------------------- > > > SF.Net email is sponsored by: Tell us your software development plans! > > > Take this survey and enter to win a one-year sub to SourceForge.net > > > Plus IDC's 2005 look-ahead and a copy of this survey > > > Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix > > > _______________________________________________ > > > linux-usb-devel@lists.sourceforge.net > > > To unsubscribe, use the last form field at: > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > > > > > > > > > > > -- > /------------------------------------+-------------------------\ > |Stephen J. Gowdy | SLAC, MailStop 34, | > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > \------------------------------------+-------------------------/ > > > ------------------------------------------------------- > SF.Net email is sponsored by: Tell us your software development plans! > Take this survey and enter to win a one-year sub to SourceForge.net > Plus IDC's 2005 look-ahead and a copy of this survey > Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix > _______________________________________________ > linux-usb-devel@lists.sourceforge.net > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > -- wwp ------------------------------------------------------- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
