Hi, I have a Billionton branded 6-1 card reader which I can't for the life of me get to recognise the SD card (the CF card works OK).
I have everything I can think of turned on, including multiple lun support. lsub shows me Bus 001 Device 005: ID 0424:20fc Standard Microsystems Corp. 6-in-1 Card Reader And when I plug it in I get May 2 00:30:57 mingus kernel: usb 1-1: USB disconnect, address 2 May 2 00:32:32 mingus kernel: usb 1-1: new full speed USB device using ohci_hcd and address 3 May 2 00:32:32 mingus kernel: uba: device 3 capacity nsec 0 bsize 512 This is the same thing I get when I plug it in with no cards in it at all. When I plug it in with a 8MB CF card I correctly get May 2 00:37:54 mingus kernel: usb 1-1: new full speed USB device using ohci_hcd and address 6 May 2 00:37:55 mingus kernel: uba: device 6 capacity nsec 15680 bsize 512 May 2 00:37:55 mingus kernel: uba: device 6 capacity nsec 15680 bsize 512 May 2 00:37:55 mingus kernel: uba: uba1 It does take about 5 seconds or so for the SD/MMC led to come on when plugged in with a card in it, whilst the CF led comes on immediately . I tried a scsi bus rescan script I found somewhere incase it was too slow coming up, but no luck. Any suggestions for debugging this further would be great. -i [EMAIL PROTECTED] http://www.wienand.org
pgpnjQpRNofEV.pgp
Description: PGP signature
