On Wed, 11 May 2005, Yi Liang wrote: > Hi, > Our kernel can support usb disk very well. But > when my pc camera is attached, it can just run for a > while, then no interrupt will be triggered by the hc > following the uhci standard. In this case, the ACTIVE > bit of the td status has been cleared by the hc, and > the IOC bit equals to 1, the ACTUAL LENGTH of td > equals to 0x7FF. And all the value of register of hc > is ok, except that value of the STATUS register equal > to 0. I don't know what happened at that time. My pc > camera with the module can work well on pc. > Would you please give some sugession on how to go > on with the damn camera?
You could start by telling us which version of Linux you're using (are you using Linux?). It also wouldn't hurt to say what the HC hardware is (vendor and chipset). What makes you think this is the camera's fault? It sounds more like a problem with your host controller. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
