Oliver Neukum wrote: > Am Mittwoch, 8. Juni 2005 12:42 schrieb Wakko Warner: > > > have you tried recompiling with debug enabled? > > > It does show the status codes in the interrupt handler. > > > > I have not. ?My keyboard and mouse (on a hub) are plugged in beside the > > kaweth device so they would be on the same interrupt. > > Sorry, I should be more specific. It will print out the error codes > internal to the USB layer which are meaningful even if interrupts are shared. > Also, are you seeing tx errors in the error count?
Unless I did something wrong, it's apparently not in the USB subsystem. I have 2.6.12-rc3 and rc4 compiled. Same config file on a test system. again, rc3 works, rc4 does not. I booted rc3 and force loaded the usb modules from rc4 into rc3. It tainted the kernel, but it worked. I booted into rc4. I do have ACPI compiled so I added acpi=off. This did not work, same problem as before. I left a ping running, the usb controller was on IRQ 9. The test system is an old NEC notebook with an Intel chipset (thus uhci-hcd usb1.1). I plugged in a Belkin USB2.0 cardbus card (USB1.1 is serviced by ohci-hcd) and plugged the ethernet adapter into that. Same problem. As far as controllers, ALL except 1 (The cardbus USB2.0) has been some version of Intel. I have tested this on 4 different systems with the same results. An MSI 6163 board, a Supermicro X5DA8 board, a Dell Inspiron 8100, and the NEC Versa FX. The Supermicro is running SMP, but I doubt that matters. At this time, it's late. I'll see about reverting files from rc4 back to rc3 to see which one causes it to work again. -- Lab tests show that use of micro$oft causes cancer in lab animals ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
