OK Here is the new DMSG output with the unit connected
Jonathan Selby wrote:
> Whoops -
>
>
> Will redo in the morning in the meantime we have a control to compare
> the results against.
>
>
>
>
>
> Jonathan Selby
> Director - Software Development
> Xaxero Marine Software Engineering Ltd
> at skype.com - xaxjon
> Satellite Phone (00) 88163 142 9922
> Cell Argentina (54) 929 0160 2064
> (00) 64 (0)9 412 7580 fax (00) 64 (0)9 412 7579
> http://www.xaxero.com
> Software for extending your horizon....
>
>
>
> Alan Stern wrote:
>
>>On Sun, 3 Jul 2005, jon wrote:
>>
>>
>>
>>>OOK - All done.
>>>
>>>I have booted the machine and loaded win 2 on VMware - the conditon
>>>wh
Linux version 2.6.11.4-21.7-default ([EMAIL PROTECTED]) (gcc version 3.3.5
20050117 (prerelease) (SUSE Linux)) #1 Thu Jun 2 14:23:14 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 260080
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 30704 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f6470
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f3000
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3f7f3040
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: local apic disabled
Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf400000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 vga=0x31a selinux=0 splash=silent
resume=/dev/hda5 showopts
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2399.951 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1026016k/1040320k available (1866k kernel code, 13472k reserved, 658k
data, 204k init, 122816k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4751.36 BogoMIPS (lpj=2375680)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1367k freed
ACPI: Looking for DSDT in initrd... not found!
not found!
ACPI: setting ELCR to 0200 (from 0a20)
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb1e0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to [EMAIL PROTECTED] cc [EMAIL PROTECTED])
pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1120462158.734:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 8000k, total
8000k
vesafb: mode is 1280x1024x16, linelength=2560, pages=2
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81978
bytes,<6>...found (1280x1024, 54169 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
PM: Checking swsusp image.
PM: Resume from disk failed.
ACPI wakeup devices:
PCI0 HUB0 USB0 USB1 USB2 USB3 MODM UAR1 UAR2
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 204k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 5 (level, low) -> IRQ 5
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
hdb: MITSUMI DW-7801TE, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ST3160023A, ATA DISK drive
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdc: max request size: 1024KiB
hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1 hdc2
hdb: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Attempting manual resume
PM: Checking swsusp image.
swsusp: Suspend partition has wrong signature?
PM: Resume from disk failed.
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED]
cdrom: open failed.
SCSI subsystem initialized
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
Capability LSM initialized
ieee1394: Initialized config rom entry `ip1394'
ieee1394: raw1394: /dev/raw1394 device initialized
ohci1394: $Rev: 1250 $ Ben Collins <[EMAIL PROTECTED]>
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:01:0e.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[ec001000-ec0017ff] Max
Packet=[2048]
video1394: Installed video1394 module
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
Adding 1020088k swap on /dev/hda5. Priority:42 extents:1
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110600000031c3]
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
load_module: err 0xffffffef (dont worry)
USB Universal Host Controller Interface driver v2.2
Linux agpgart interface v0.100 (c) Dave Jones
intel8x0_measure_ac97_clock: measured 49983 usecs
intel8x0: clocking to 47005
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xec180000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
load_module: err 0xffffffef (dont worry)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 5, io base 0xd800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 9, io base 0xd000
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 5, io base 0xd400
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 933M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
usb 1-3: new high speed USB device using ehci_hcd and address 3
usb 2-1: new full speed USB device using uhci_hcd and address 2
e100: Intel(R) PRO/100 Network Driver, 3.4.1-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xec000000, irq 11, MAC addr 00:03:1D:00:8C:A3
bootsplash: status on console 0 changed to on
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
cdrom: open failed.
st: Version 20041025, fixed bufsize 32768, s/g segs 256
skydriver_driver: unsupported module, tainting kernel.
/home/jon/skyeye/install_kernel_2.6/skydriver-driver.c: USB SkyEye device now
attached to 192
usbcore: registered new driver Xaxero_SkyEye
/home/jon/skyeye/install_kernel_2.6/skydriver-driver.c: Xaxero SkyEye USB
Driver v0.93
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Vendor: KINGMAX Model: USB Flash Disk Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
Non-volatile memory driver v1.2
NET: Registered protocol family 10
Disabled Privacy Extensions on device c033d600(lo)
IPv6 over IPv4 tunneling driver
Disabled Privacy Extensions on device f6b39c00(sit0)
bootsplash: status on console 0 changed to on
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI: Thermal Zone [THRM] (25 C)
vmmon: no version for "struct_module" found: kernel tainted.
vmmon: unsupported module, tainting kernel.
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[6706]: VMMON CPUID: Unrecognized CPU
/dev/vmmon[6706]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6706]: Module vmmon: initialized
vmnet: unsupported module, tainting kernel.
powernow: This module only works with AMD K7 CPUs
/dev/vmnet: open called by PID 6757 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
eth0: no IPv6 routers present
/dev/vmnet: open called by PID 6795 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 5 (level, low) -> IRQ 5
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x400000
[drm] Initialized i915 1.1.0 20040405 on minor 0:
mtrr: base(0xe0020000) is not aligned on a size(0x800000) boundary
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x400000
/dev/vmnet: open called by PID 7023 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 7022 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 7072 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 7071 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
bootsplash: status on console 0 changed to on
subfs 0.9
vmnet8: no IPv6 routers present
vmnet1: no IPv6 routers present
usb 2-1: usbdev_ioctl: CONTROL
usb 2-1: control read: bRequest=06 bRrequestType=80 wValue=0300 wIndex=0000
usb 2-1: control read: data 04 03 09 04
usb 2-1: usbdev_ioctl: CONTROL
usb 2-1: control read: bRequest=06 bRrequestType=80 wValue=0301 wIndex=0409
usb 2-1: control read: data 1a 03 09 04 89 86 7a 7e 11 b1 9c e3 42 eb e3 90 35
c6 a8 d9 91 fd 8a c4 15 56 cb ac 1f 16 c3 38 36 0a 76 ac 05 f3 ae c7 d0 2f 78
43 3a 21 c3 78 8e 32 7f 1a 75 2b 01 db 6a db c3 83 ac 4b f3 be 26 b8 0f 29 7a
66 20 d3 13 dc 4b 52 aa b2 be 6e 9c c5 e6 ef cb 87 b9 f6 0d 6a d9 9b 3d 86 b5
e6 7b 9b 23 b5 17 26 6f 8e 4a 78 a8 b4 91 9b e2 e7 29 28 1f 7f 1a f0 7a 7a c8
5a a4 1f 55 16 7b b7 71 b6 71 b1 77 83 b1 f7 46 d3 36 ac 4a 6e 79 dc 3a 50 a5
83 ed b5 fa 72 9d d7 bd 4f 2d 5a b0 59 f0 ed bc df 9b 7c 8e 5c fb ac 9f bc ef
83 da f5 79 35 4c f0 d7 13 f0 18 7b fa 27 95 e2 94 2f 12 bf 15 08 17 b6 70 77
71 ab c9 d3 eb 2f 1d 51 a1 79 f3 31 4c d4 0a af e9 1b 99 f0 42 15 23 06 63 be
f6 22 5d 5a ae ed 39 d2 46 37 4e 0c 54 f2 1e 75 ae 6d d7 01 c6 ca 55 c9 65 61
44 4b 5f 2d a9 1d a9 1e bf b8 37 a6 c8 37 34 c3 a3 89 5c 9f 5b 34 e4 af 48 5a
9b 3c 91 6f d8 bc 89 9c aa a6 55 1b ce 41 98 d9 5e 70 64 6d 0f 74 a8 45 ae dd
76 ce 5c 40 b8 b0 eb 65 39 4e 7e ab 8a 90 94 3d 53 16 93 30 60 60 ef 2d c8 b6
c5 e9 ac 08 66 dc 48 95 53 c2 12 a8 2a a8 cf a3 c2 fd 39 9d f5 3d 49 ce e0 09
db c3 66 9d 5a cd b2 4f 5a c7 a3 1b 92 71 0b d5 89 e5 e9 4b 71 94 fe 3b b8 75
72 6c 0d 31 a9 81 3e b4 e7 11 48 82 f0 76 85 8a cc 27 87 29 7a c2 0d 6a c5 fb
31 42 b8 af b7 52 de 96 7c e9 25 b1 6f ec 94 c4 a8 42 5d c3 1f f4 95 e1 97 b1
40 37 2c d3 54 ed 3e f4 44 66 36 bc 6e da 79 e1 f8 bd 67 99 d3 52 8e f6 c8 79
32 46 88 9a 6c 1f 76 ff 71 eb 59 ba 4f e2 01 44 53 f1 15 8d 93 a3 33 39 55 21
26 cc 80 d4 ec 9d e0 94 01 ce 07 18 7e 48 4a 21 0e 93 3e af 2e 3a f7 b7 8b b7
59 8e 8b
usb 2-1: usbdev_ioctl: CONTROL
usb 2-1: control read: bRequest=06 bRrequestType=80 wValue=0302 wIndex=0409
usb 2-1: control read: data 1c 03 de 9b 9e 2c f6 de a9 3d 93 a2 b9 6f 29 11 8b
b0 79 92 7d f4 1b 10 cd c9 f2 46 3d a4 8c 46 2f 96 f3 08 3a 54 d0 84 b9 b4 b4
b7 05 54 55 df f7 2f 7a e8 e6 d0 25 dd 82 b4 08 0a 92 02 82 84 84 74 c7 21 04
a4 3b 0e 2d 1c 4a a5 04 01 a5 15 e9 52 0e dd dd dd 8d 5b 52 ba b9 1b bf bf df
ef de ff 1d 37 de 78 6f bc 33 c6 d9 6b ef 35 73 ad 39 d7 5c f3 43 45 b3 c3 7c
99 7a a0 7c 1f 5d ea 50 52 25 49 de ec 76 c4 44 7c bb 73 ea 4f c8 5e de 13 3c
9d 5b 73 71 de b7 c1 cb 34 01 02 9f eb e5 0f e3 a3 f6 a2 17 1f 33 44 0f a7 0f
36 8b 9b 1f 17 ba 83 89 cf 17 8d 1a 8a d9 a5 2e 65 f8 4c da 11 f7 35 fe d5 19
b2 5d 59 34 f8 fe 54 b3 a5 f0 41 fa ea f0 bd 7a 54 a1 e5 a3 3f 4d d7 9e d4 31
34 9b d1 9f 60 24 4f 33 46 6d 49 7d 47 2d 62 be 25 8f 1e fa f0 4f cc 2a 0a c8
67 a6 ca b8 99 a5 b1 c4 3d b6 54 ae ee 73 ba 95 ff d9 7a 14 47 6d 3d ff d5 fc
e7 7d cb b6 94 96 a5 93 ab cd 94 a6 d4 e0 15 a7 8c 18 2f 5e 2f 55 8f 4c 4e d3
bd 5a e2 ae 21 72 41 16 09 e6 c6 7b 9c f6 56 ef 56 2b 2a 82 a4 4e b7 4f aa 5e
86 7f e2 c6 f5 8a d6 3e 21 8c 42 2a 7e d2 a1 66 87 0d 05 98 fe 98 6d 36 21 ef
40 e5 69 32 08 08 6c 82 96 9a 66 ad dd a7 a6 f9 f0 91 90 90 75 b2 c1 92 c5 d0
a6 5f 1f 81 c6 61 ca 6a 27 19 ad 9e 9d ce eb 97 70 f5 90 e2 3a 4b de cf c9 c1
b2 d4 fa 13 1b 99 65 bf 44 ac 7c 07 ce ea d6 8e ea b7 fe 81 67 fa 74 a1 b8 d7
cb 47 fa 9a 26 96 67 cd 07 2f 86 bf 0e 45 0c da ca 6e 56 f2 10 67 16 a4 19 bd
dc bf 7c 04 7d 26 f5 6e b0 88 25 a4 4d 4a 39 cd 52 af 61 93 18 85 84 62 6f 99
46 be 03 97 48 7c de c9 69 25 53 37 dd 27 10 2b 35 56 88 66 74 64 07 35 58 5c
86 f6 62
usb 1-3: usbdev_ioctl: CONTROL
usb 1-3: control read: bRequest=06 bRrequestType=80 wValue=0300 wIndex=0000
usb 1-3: control read: data 04 03 09 04
usb 1-3: usbdev_ioctl: CONTROL
usb 1-3: control read: bRequest=06 bRrequestType=80 wValue=0301 wIndex=0409
usb 1-3: control read: data 12 03 55 00 53 00 42 00 20 00 20 00 20 00 20 00 20
00 79 92 7d f4 1b 10 cd c9 f2 46 3d a4 8c 46 2f 96 f3 08 3a 54 d0 84 b9 b4 b4
b7 05 54 55 df f7 2f 7a e8 e6 d0 25 dd 82 b4 08 0a 92 02 82 84 84 74 c7 21 04
a4 3b 0e 2d 1c 4a a5 04 01 a5 15 e9 52 0e dd dd dd 8d 5b 52 ba b9 1b bf bf df
ef de ff 1d 37 de 78 6f bc 33 c6 d9 6b ef 35 73 ad 39 d7 5c f3 43 45 b3 c3 7c
99 7a a0 7c 1f 5d ea 50 52 25 49 de ec 76 c4 44 7c bb 73 ea 4f c8 5e de 13 3c
9d 5b 73 71 de b7 c1 cb 34 01 02 9f eb e5 0f e3 a3 f6 a2 17 1f 33 44 0f a7 0f
36 8b 9b 1f 17 ba 83 89 cf 17 8d 1a 8a d9 a5 2e 65 f8 4c da 11 f7 35 fe d5 19
b2 5d 59 34 f8 fe 54 b3 a5 f0 41 fa ea f0 bd 7a 54 a1 e5 a3 3f 4d d7 9e d4 31
34 9b d1 9f 60 24 4f 33 46 6d 49 7d 47 2d 62 be 25 8f 1e fa f0 4f cc 2a 0a c8
67 a6 ca b8 99 a5 b1 c4 3d b6 54 ae ee 73 ba 95 ff d9 7a 14 47 6d 3d ff d5 fc
e7 7d cb b6 94 96 a5 93 ab cd 94 a6 d4 e0 15 a7 8c 18 2f 5e 2f 55 8f 4c 4e d3
bd 5a e2 ae 21 72 41 16 09 e6 c6 7b 9c f6 56 ef 56 2b 2a 82 a4 4e b7 4f aa 5e
86 7f e2 c6 f5 8a d6 3e 21 8c 42 2a 7e d2 a1 66 87 0d 05 98 fe 98 6d 36 21 ef
40 e5 69 32 08 08 6c 82 96 9a 66 ad dd a7 a6 f9 f0 91 90 90 75 b2 c1 92 c5 d0
a6 5f 1f 81 c6 61 ca 6a 27 19 ad 9e 9d ce eb 97 70 f5 90 e2 3a 4b de cf c9 c1
b2 d4 fa 13 1b 99 65 bf 44 ac 7c 07 ce ea d6 8e ea b7 fe 81 67 fa 74 a1 b8 d7
cb 47 fa 9a 26 96 67 cd 07 2f 86 bf 0e 45 0c da ca 6e 56 f2 10 67 16 a4 19 bd
dc bf 7c 04 7d 26 f5 6e b0 88 25 a4 4d 4a 39 cd 52 af 61 93 18 85 84 62 6f 99
46 be 03 97 48 7c de c9 69 25 53 37 dd 27 10 2b 35 56 88 66 74 64 07 35 58 5c
86 f6 62
usb 1-3: usbdev_ioctl: CONTROL
usb 1-3: control read: bRequest=06 bRrequestType=80 wValue=0302 wIndex=0409
usb 1-3: control read: data 22 03 46 00 6c 00 61 00 73 00 68 00 20 00 44 00 69
00 73 00 6b 00 20 00 20 00 20 00 20 00 20 00 20 00 14 78 b8 c4 06 75 f4 80 97
a7 c1 2f b6 85 5a fb c9 78 c2 32 4a 62 f2 5f 0e 79 12 cf de 4b c7 8f a8 aa 57
b9 9d 5e bd 7b b3 e0 e1 45 01 c4 78 63 dc dd 55 ae 17 00 c5 c5 9b fa 9c be 35
f1 68 3d 98 ab be 9b de aa fd 82 f8 56 12 5c e8 d2 be 86 d9 4d 90 d5 74 33 d0
72 0f e5 f0 d8 36 b8 1f 88 90 6e 30 75 2e 12 f2 5e 38 64 47 d5 82 2a c8 4a 32
c9 1f 13 6f 2e bd 83 1b 10 91 d4 2f 4b bc f3 a9 8e be d3 aa 46 a8 55 5d 83 6f
41 54 1c d2 3d 8d 1e 12 7c 9a d9 17 b3 53 0f ae 83 66 00 fe d4 09 48 d4 47 e9
12 e4 5c bb fc c5 43 fc bc 8f aa 53 0e 38 b0 f3 15 ba 2d 51 c3 90 bd 43 9f 70
f5 d0 52 89 49 3b 07 ea dd 70 4e a6 6b 4e e2 d8 90 e1 5e 4b d0 37 23 c5 94 31
0e 53 29 f8 7a 50 5d e5 df db f0 4f 14 e2 64 81 bd a8 82 b2 42 45 ec 6e c5 23
a4 ac 14 db 82 ce dd 33 e0 5a 38 da cb 45 4f 24 83 88 73 6b de 62 84 22 67 6c
39 c5 f0 ce 93 b0 5b 7b 55 91 4f 40 6c 03 66 6b 8b 28 bc 44 4f 13 6d 1f 0a ce
15 94 8d b0 c2 a7 f9 17 34 21 43 52 f7 91 f3 7a f6 7b 5c bc 3f 61 95 2f 6d 1b
37 af 91 e4 8a b2 fa fe 68 78 92 b4 60 e2 52 fa e4 4e 5e 22 d7 0c 2e c5 77 a4
6e ef 0e fb c8 3d a3 b8 cb c4 4f 87 a2 3e f3 60 78 2d c1 6c cd 39 73 fb ec 0f
05 eb 7d 85 de b5 e0 26 3c 28 34 39 fc be 16 d8 bf 7d 40 da f8 c5 b9 15 2a d3
60 7d 5b 49 3e 33 3f 6f 8a fe c4 5a b0 2c ab b0 78 3f 16 5f eb d6 c1 a6 89 a2
d9 25 87 10 5b 84 e8 fc 27 42 f7 f1 33 0d 3a ac f8 1c ae 47 36 45 3f 46 af 60
1c f6 06 4e 1c 3d 9b d7 9f b0 60 f6 fc fa 66 50 19 c4 d5 03 a3 27 d9 60 70 74
6e 49 4f
/dev/vmnet: open called by PID 7549 (vmware-vmx)
device eth0 entered promiscuous mode
bridge-eth0: enabled promiscuous mode
/dev/vmnet: port on hub 0 successfully opened
/dev/vmmon[7557]: host clock rate change request 0 -> 19
/dev/vmmon[7557]: host clock rate change request 19 -> 83
device eth0 left promiscuous mode
bridge-eth0: disabled promiscuous mode
/dev/vmnet: open called by PID 7557 (vmware-vmx)
device eth0 entered promiscuous mode
bridge-eth0: enabled promiscuous mode
/dev/vmnet: port on hub 0 successfully opened
