On Wed, 6 Jul 2005, Roberts-Thomson, James wrote: > Alan, > > > Try putting delays at various spots in sd_revalidate_disk: > > the beginning, the middle, and the end. > > OK, the attached patch works for me when sd_mod was loaded with delay_use=1. > > Now I'm quite prepared to be told that this is a really horrible and > inapproprate hack (given that I am not a kernel developer, I don't really > know the "correct" way to solve this problem); and I'll cheerfully admit > that it doesn't really solve the problem cleanly as can be seen below:
It would have been better simply to call msleep, but never mind. > Jul 6 14:44:52 pc196344 kernel: sd: waiting for device to get ready. > Jul 6 14:44:53 pc196344 kernel: sda: Unit Not Ready, sense: > Jul 6 14:44:53 pc196344 kernel: : Current: sense key: Unit Attention > Jul 6 14:44:53 pc196344 kernel: Additional sense: Not ready to ready > change, medium may have changed > Jul 6 14:44:53 pc196344 kernel: sda : READ CAPACITY failed. > Jul 6 14:44:53 pc196344 kernel: sda : status=1, message=00, host=0, > driver=08 > Jul 6 14:44:53 pc196344 kernel: sd: Current: sense key: Unit Attention > Jul 6 14:44:53 pc196344 kernel: Additional sense: Not ready to ready > change, medium may have changed > Jul 6 14:44:53 pc196344 kernel: sda: test WP failed, assume Write Enabled > Jul 6 14:44:53 pc196344 kernel: sda: assuming drive cache: write through > Jul 6 14:44:53 pc196344 kernel: sd: waiting for device to get ready. > Jul 6 14:44:54 pc196344 kernel: sda: Unit Not Ready, sense: > Jul 6 14:44:54 pc196344 kernel: : Current: sense key: Unit Attention > Jul 6 14:44:54 pc196344 kernel: Additional sense: Not ready to ready > change, medium may have changed > Jul 6 14:44:54 pc196344 kernel: sda : READ CAPACITY failed. > Jul 6 14:44:54 pc196344 kernel: sda : status=1, message=00, host=0, > driver=08 > Jul 6 14:44:54 pc196344 kernel: sd: Current: sense key: Unit Attention > Jul 6 14:44:54 pc196344 kernel: Additional sense: Not ready to ready > change, medium may have changed > Jul 6 14:44:54 pc196344 kernel: sda: test WP failed, assume Write Enabled > Jul 6 14:44:54 pc196344 kernel: sda: assuming drive cache: write through > Jul 6 14:44:54 pc196344 kernel: sd: waiting for device to get ready. > Jul 6 14:44:55 pc196344 kernel: SCSI device sda: 255488 512-byte hdwr > sectors (131 MB) > Jul 6 14:44:55 pc196344 kernel: sda: Write Protect is off > Jul 6 14:44:55 pc196344 kernel: sda: Mode Sense: 03 00 00 00 > Jul 6 14:44:55 pc196344 kernel: sda: assuming drive cache: write through > Jul 6 14:44:55 pc196344 kernel: /dev/scsi/host5/bus0/target0/lun0: p1 > Jul 6 14:44:55 pc196344 kernel: Attached scsi removable disk sda at scsi5, > channel 0, id 0, lun 0 > > There are three delays from my patch in the above list, Yes. Why are there three instead of just one? The sd_revalidate_disk routine should only be called once (although a bug in recent kernels causes it to be called twice). > and increasing the > delay to 3 seconds didn't help, as I got three one-second delays. I don't understand. Why didn't you get three three-second delays? > However, if someone with the appropriate knowledge could transform my kludge > into a proper fix, then I would be very happy. Can you try adding delays before, after, and inbetween the calls to sd_read_capacity, sd_read_write_protect_flag, and sd_read_cache_type, all near the end of sd_revalidate_disk? > Alan, thanks very much for your help - I really appreciate the quick > responses you have given me. > > Note that I now have the output from the USB Snoop tool under Windows if > anyone wants it - please ask if needed to help solve the issue "correctly". Can you make it available on a web or ftp site and post the URL for interested parties? Alan Stern ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
