[linux-usb-devel] Re: tungsten t5 doesn't sync anymore with kernel 2.6.12

Eric FAURE Fri, 05 Aug 2005 00:39:05 -0700


Andrew Morton a écrit :

Eric FAURE <[EMAIL PROTECTED]> wrote:



Andrew Morton wrote:

Eric FAURE <[EMAIL PROTECTED]> wrote:

hi,
First, I tried to googled but I didn't find any answer!

CPU : athlon64 3500+
MB : k8t800pro (uhci and ehci)
FC 3

since I have installed kernel 2.6.12, my tungsten t5 doesn't sync anymore.
I push the sync button as usual, and after use jpilot or pilot-xfer
but I have an error from jpilot (pi_bind Invalid argument
Check your serial port and settings Exiting with status SYNC_ERROR_BIND)

and pilot-xfer : Error accessing: '/dev/pilot', Does '/dev/pilot' exist?

there is no special error messages,
dmesg output :

usb 3-2: new full speed USB device using uhci_hcd and address 5
visor 3-2:1.0: Handspring Visor / Palm OS converter detected
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
usb 3-2: USB disconnect, address 5

visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected

from ttyUSB0

visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected

from ttyUSB1

visor 3-2:1.0: device disconnected
usb 3-2: new full speed USB device using uhci_hcd and address 6
visor 3-2:1.0: Handspring Visor / Palm OS converter detected
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
usb 3-2: USB disconnect, address 6

visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected

from ttyUSB0

visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected

from ttyUSB1

visor 3-2:1.0: device disconnected
usb 3-2: new full speed USB device using uhci_hcd and address 7
visor 3-2:1.0: Handspring Visor / Palm OS converter detected
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1

it looks ok. output of kernel 2.6.11.12 is mostly the same


I tried loading the visor driver with debug=1
and here, the messages are differents from the kernel 2.6.11.12
dmesg kernel 2.6.12 output :

usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0

drivers/usb/serial/usb-serial.c: USB Serial support registered forHandspring Visor / Palm OSdrivers/usb/serial/usb-serial.c: USB Serial support registered for SonyClie 3.5drivers/usb/serial/usb-serial.c: USB Serial support registered for SonyClie 5.0

usbcore: registered new driver visor
drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver v2.1
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: device descriptor read/64, error -71
drivers/usb/serial/visor.c: visor_probe
drivers/usb/serial/visor.c: palm_os_4_probe

usb 3-2: palm_os_4_probe - length = 20, data = 01 01 00 00 4c 73 66 7200 67 00 00 00 00 00 00 01 01 00 00

visor 3-2:1.0: Handspring Visor / Palm OS converter detected
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
usb 3-2: USB disconnect, address 2
drivers/usb/serial/visor.c: visor_shutdown

visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected

from ttyUSB0

visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected

from ttyUSB1

visor 3-2:1.0: device disconnected
usb 3-2: new full speed USB device using uhci_hcd and address 3
drivers/usb/serial/visor.c: visor_probe
drivers/usb/serial/visor.c: palm_os_4_probe

usb 3-2: palm_os_4_probe - length = 20, data = 01 01 00 00 63 6e 79 7300 67 00 00 00 00 00 00 01 01 00 00

visor 3-2:1.0: Handspring Visor / Palm OS converter detected
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1
drivers/usb/serial/visor.c: visor_open - port 1
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5402
drivers/usb/serial/visor.c: visor_set_termios - port 1
drivers/usb/serial/visor.c: visor_set_termios - data bits = 8
drivers/usb/serial/visor.c: visor_set_termios - parity = none
drivers/usb/serial/visor.c: visor_set_termios - stop bits = 1
drivers/usb/serial/visor.c: visor_set_termios - RTS/CTS is disabled
drivers/usb/serial/visor.c: visor_set_termios - XON/XOFF is disabled
drivers/usb/serial/visor.c: visor_set_termios - baud rate = 9600
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5403
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_set_termios - port 1
drivers/usb/serial/visor.c: visor_set_termios - nothing to change...
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_read_bulk_callback - port 1

visor ttyUSB1: visor_read_bulk_callback - length = 6, data = 01 ff 00 0000 16

drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_close - port 1
drivers/usb/serial/visor.c: visor_read_bulk_callback - port 1

drivers/usb/serial/visor.c: visor_read_bulk_callback - nonzero read bulkstatus received: -2

drivers/usb/serial/visor.c: visor_open - port 1
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5402
drivers/usb/serial/visor.c: visor_set_termios - port 1
drivers/usb/serial/visor.c: visor_set_termios - nothing to change...
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5403
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_set_termios - port 1
drivers/usb/serial/visor.c: visor_set_termios - nothing to change...
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_close - port 1
drivers/usb/serial/visor.c: visor_read_bulk_callback - port 1

drivers/usb/serial/visor.c: visor_read_bulk_callback - nonzero read bulkstatus received: -2

drivers/usb/serial/visor.c: visor_open - port 1
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5402
drivers/usb/serial/visor.c: visor_set_termios - port 1
drivers/usb/serial/visor.c: visor_set_termios - nothing to change...
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5401
drivers/usb/serial/visor.c: visor_ioctl - port 1, cmd 0x5403
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_set_termios - port 1
drivers/usb/serial/visor.c: visor_set_termios - nothing to change...
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_chars_in_buffer - port 1
drivers/usb/serial/visor.c: visor_write_room - port 1
drivers/usb/serial/visor.c: visor_close - port 1
drivers/usb/serial/visor.c: visor_read_bulk_callback - port 1

drivers/usb/serial/visor.c: visor_read_bulk_callback - nonzero read bulkstatus received: -2

usb 3-2: USB disconnect, address 3
drivers/usb/serial/visor.c: visor_shutdown

visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected

from ttyUSB0

visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected

from ttyUSB1

visor 3-2:1.0: device disconnected
usb 3-2: new full speed USB device using uhci_hcd and address 4
drivers/usb/serial/visor.c: visor_probe
drivers/usb/serial/visor.c: palm_os_4_probe

usb 3-2: palm_os_4_probe - length = 20, data = 01 01 00 00 4c 73 66 7200 67 00 00 00 00 00 00 01 01 00 00

visor 3-2:1.0: Handspring Visor / Palm OS converter detected
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB0
usb 3-2: Handspring Visor / Palm OS converter now attached to ttyUSB1

something looks strange here,
let me know, if you need more infos.



Is this still happening in 2.6.13-rc4?

If so, then please cc linux-usb-devel@lists.sourceforge.net on the reply,
thanks.


it's still happening in 2.6.13-rc5



Well -rc6 is about to come out, but I don't think there's any reason to
expect it'll be any better.

This is a regression, isn't it?  Reading back, it's not clear to me which
was the last-known-working kernel.  Can you please tell us?


last working kernels were the 2.6.11.x series



-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

[linux-usb-devel] Re: tungsten t5 doesn't sync anymore with kernel 2.6.12

Reply via email to