Chris White <[EMAIL PROTECTED]> wrote: > > [Pre Note: please CC me all responses, thanks] > > Currently, I have a Logitech Quickcam Express webcamera. Unfortunately, it > seems to have issues getting assigned an address. I quote the following > from dmesg: > > usb 1-1.1: new full speed USB device using ehci_hcd and address 11 > usb 1-1.1: device descriptor read/64, error -32 > usb 1-1.1: device descriptor read/64, error -32 > usb 1-1.1: new full speed USB device using ehci_hcd and address 12 > usb 1-1.1: device descriptor read/64, error -32 > usb 1-1.1: device descriptor read/64, error -32 > usb 1-1.1: new full speed USB device using ehci_hcd and address 13 > usb 1-1.1: device not accepting address 13, error -32 > usb 1-1.1: new full speed USB device using ehci_hcd and address 14 > usb 1-1.1: device not accepting address 14, error -32 > > As far as the host goes, I have the following USB hosts: > > 0000:00:11.0 USB Controller: NEC Corporation USB (rev 43) > 0000:00:11.1 USB Controller: NEC Corporation USB (rev 43) > 0000:00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04) > > The first is my builtin Intel USB controller, the second is one belkin > USB 1.0 card, and another 2.0 card. I've tried it in all three just to > verify one of my hosts wasn't broken. Considering my printer works with > it, as well as my scanner, I'm sort of thinking that's not an issue. > > I searched up google a bit and recieved some warnings about acpi causing > problems, so I disabled that, but was still unsucessful in getting that to > work. Please let me know if any other information is required. Thanks > ahead of time. >
(Added linux-usb-devel) Which kernel version? Did it work OK under a previous kernel version? If so, which? ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
