Alan,
> Why is status set to -131 instead of -ECONNRESET?
ECONNRESET is defined as 131 in linux-2.4.30 mips
tree.
EUNRECOVERABLE isn't defined.
> The log shows everything worked okay (if you ignore
> the problem of the
> illegal status codes) until the computer tried to do
> a 127 KB write. Some
> devices don't like to transfer more than 120 KB at a
> time, maybe that's
> the problem you're seeing here.
The read operation is ok since I have read 80MB file
many times, the status is always 0x08, 0x80 and 0x00.
Many transactions having the DataTransferLength=127K
transferred data successfully. Also, I have tried on a
PCI card and my PC with the same usb key, it works
just fine(no status=0x80 or 0x08, of course).
At this point, I think there is something fishy inside
our HCD.
Thanks,
--Craig
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
