On Aug 25, 2005, at 7:58 AM, Alan Stern wrote:
Forget about it.
That may be what I have to say in the end.
After recovering from kicking myself and calming down, it finally
dawned on me that this entire fiasco is probably the result of a
defective plug or wire.
So I stopped by a store on my way back and picked up a USB2
front-panel card reader + port that the purveyors _swore_ would work.
It does. No problem with the mobo plug (obviously) and it behaves
exactly as advertised. Both 2.6.12.3 and 2.6.12.5 run it just fine,
stock out of the box. At least one card reader, and the usb plug, work
fine -- including the PiO/Genesys device in question.
The cable length and plugs look identical, as does the pinout. So my
best guess is I have a bad wire or crappy connection somewhere.
Other than hara-kiri, if there is anything I can further help with,
please let me know.
Dave North
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
