does not work properly.
it seems to attach the device to /dev/usb/ttyACM0 as dmesg shows,
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for
USB modems and ISDN adapters
usb 1-1: new full speed USB device using uhci_hcd and address 13
cdc_acm 1-1:1.0: ttyACM0: USB ACM device
but then pppd has problems, so trying to access the modem via minicom...
BlackDeath:{root}:~>minicom
LANG/ja
LANG/ko
LANG/ru
LC_ALL/ja
LC_ALL/ko
LC_ALL/ru
minicom: cannot open /dev/usb/ttyACM0: Input/output error
/proc/bus/usb/devuces gives:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0bb4 ProdID=00cf Rev= 0.90
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=02(comm.) Sub=ff Prot=ff Driver=cdc_acm
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=80ms
regards
Luigi
On Thu, September 1, 2005 22:48, Oliver Neukum wrote:
>
>> As I said, cdc-acm is not satisfied with this kind of device. I do not
>> know how to make it work. Also usbserial didn't work. How could I make
>> them work?
>
> Try the attached version of cdc-acm
>
>
> Regards
> Oliver
>
>
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
