Nothing earth-shattering, these came up from people reading
the code not real-world error reports.
- Dave
Three minor sl811-hcd fixes:
- Elminate memory leak on one (rare) disable/shutdown path.
- For periodic transfers that don't need to be scheduled, update
urb->start_frame to represent the transfer phase correctly.
- Report the (single) port as removable, by default.
Since no drivers yet use start_frame or that part of the hub descriptor,
only that leak is likely to ever matter.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
--- g26.orig/drivers/usb/host/sl811-hcd.c 2005-09-10 16:08:28.000000000 -0700
+++ g26/drivers/usb/host/sl811-hcd.c 2005-09-11 12:25:52.000000000 -0700
@@ -782,6 +782,9 @@ retry:
/* usb 1.1 says max 90% of a frame is available for periodic transfers.
* this driver doesn't promise that much since it's got to handle an
* IRQ per packet; irq handling latencies also use up that time.
+ *
+ * NOTE: the periodic schedule is a sparse tree, with the load for
+ * each branch minimized. see fig 3.5 in the OHCI spec for example.
*/
#define MAX_PERIODIC_LOAD 500 /* out of 1000 usec */
@@ -843,6 +846,7 @@ static int sl811h_urb_enqueue(
if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
|| !HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
+ kfree(ep);
goto fail;
}
@@ -911,8 +915,16 @@ static int sl811h_urb_enqueue(
case PIPE_ISOCHRONOUS:
case PIPE_INTERRUPT:
urb->interval = ep->period;
- if (ep->branch < PERIODIC_SIZE)
+ if (ep->branch < PERIODIC_SIZE) {
+ /* NOTE: the phase is correct here, but the value
+ * needs offsetting by the transfer queue depth.
+ * All current drivers ignore start_frame, so this
+ * is unlikely to ever matter...
+ */
+ urb->start_frame = (sl811->frame & (PERIODIC_SIZE - 1))
+ + ep->branch;
break;
+ }
retval = balance(sl811, ep->period, ep->load);
if (retval < 0)
@@ -1122,7 +1134,7 @@ sl811h_hub_descriptor (
desc->wHubCharacteristics = (__force __u16)cpu_to_le16(temp);
/* two bitmaps: ports removable, and legacy PortPwrCtrlMask */
- desc->bitmap[0] = 1 << 1;
+ desc->bitmap[0] = 0 << 1;
desc->bitmap[1] = ~0;
}
