I'm having an El Cheapo usb keyboard+mouse usb device, and an Logitech MX700
usb mouse connected to a computer.
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 060b:5811 Solid Year ACK-571U Wireless Keyboard
Bus 001 Device 003: ID 046d:c506 Logitech, Inc. MX-700 Cordless Mouse Receiver
Bus 001 Device 001: ID 0000:0000
The MX700 has no problems, I'm just including it here for completeness.
The "keyboardmouse" ("km") is the problem. It sometimes disconnects for no
good reason. If the km has disconnected, it can easily be reconnected by
physically reconnecting the device, but that's wrong on so many levels.. :-)
Now, I finally managed to get a debug-enabled dmesg output at the time
something like this happened. I have to be completely honest when I say I
can't remember if this is at the first or second disconnect. It seems to be
the second one, though.
Can somebody take a look at the atteched dmesg? It's with usb full-debug mode
on, and goes all the way back to the start of the machine. It should be easy
to read, and complete.
I can't really figure out what's going on, so I hope someone here can :-)
--
Regards,
Christian Iversen
Linux version 2.6.13-venus ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian
1:3.3.5-13)) #1 SMP Thu Oct 20 12:09:56 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131052
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126956 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6e20
ACPI: RSDT (v001 ASUS A7V266-E 0x30303031 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS A7V266-E 0x30303031 MSFT 0x31313031) @ 0x1ffec080
ACPI: BOOT (v001 ASUS A7V266-E 0x30303031 MSFT 0x31313031) @ 0x1ffec040
ACPI: DSDT (v001 ASUS A7V266-E 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
Built 1 zonelists
Kernel command line: root=/dev/hda1
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01413000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1343.234 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513056k/524208k available (3699k kernel code, 10688k reserved, 1440k
data, 276k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2688.08 BogoMIPS (lpj=1344040)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000
00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0c20)
CPU0: AMD Athlon(TM) XP1500+ stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0ed0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: d6000000-d7dfffff
PREFETCH window: d7f00000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:02: ioport range 0xe800-0xe80f has been reserved
pnp: 00:02: ioport range 0x290-0x291 has been reserved
pnp: 00:02: ioport range 0x370-0x373 has been reserved
Simple Boot Flag at 0x3a set to 0x1
IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]>
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver 2.1.23 [Flags: R/O].
Using specific hotkey driver
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Waking up queue on fd0
Waking up queue on ram0
Waking up queue on ram1
Waking up queue on ram2
Waking up queue on ram3
Waking up queue on ram4
Waking up queue on ram5
Waking up queue on ram6
Waking up queue on ram7
Waking up queue on ram8
Waking up queue on ram9
Waking up queue on ram10
Waking up queue on ram11
Waking up queue on ram12
Waking up queue on ram13
Waking up queue on ram14
Waking up queue on ram15
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Waking up queue on loop0
Waking up queue on loop1
Waking up queue on loop2
Waking up queue on loop3
Waking up queue on loop4
Waking up queue on loop5
Waking up queue on loop6
Waking up queue on loop7
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe ([EMAIL PROTECTED]) and [EMAIL PROTECTED]
nbd: registered device at major 43
Waking up queue on nbd0
Waking up queue on nbd1
Waking up queue on nbd2
Waking up queue on nbd3
Waking up queue on nbd4
Waking up queue on nbd5
Waking up queue on nbd6
Waking up queue on nbd7
Waking up queue on nbd8
Waking up queue on nbd9
Waking up queue on nbd10
Waking up queue on nbd11
Waking up queue on nbd12
Waking up queue on nbd13
Waking up queue on nbd14
Waking up queue on nbd15
Ethernet Channel Bonding Driver: v2.6.3 (June 8, 2005)
bonding: Warning: either miimon or arp_interval and arp_ip_target module
parameters must be specified, otherwise bonding will not detect link failures!
see bonding.txt for details.
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:00:10.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
eth0: RealTek RTL8139 at 0xa800, 00:48:54:6f:b8:41, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139B'
Equalizer2002: Simon Janes ([EMAIL PROTECTED]) and David S. Miller
([email protected])
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]>
Loaded prism54 driver, version 1.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
Waking up queue on hda
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Waking up queue on hdd
ide-floppy driver 0.99.newide
st: Version 20050501, fixed bufsize 32768, s/g segs 256
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3568.000 MB/sec
raid5: using function: pIII_sse (3568.000 MB/sec)
raid6: int32x1 539 MB/s
raid6: int32x2 714 MB/s
raid6: int32x4 464 MB/s
raid6: int32x8 425 MB/s
raid6: mmxx1 1101 MB/s
raid6: mmxx2 1890 MB/s
raid6: sse1x1 1074 MB/s
raid6: sse1x2 1746 MB/s
raid6: using algorithm sse1x2 (1746 MB/s)
md: raid6 personality registered as nr 8
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13
2005 UTC).
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10
ALSA device list:
#0: C-Media PCI CMI8738-MC6 (model 55) at 0xd800, irq 10
u32 classifier
OLD policer on
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
ip_tables: (C) 2000-2002 Netfilter core team
input: AT Translated Set 2 keyboard on isa0060/serio0
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Using IPI Shortcut mode
Waking up queue on md0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: replayed 3 transactions in 0 seconds
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 276k freed
psmouse: no version for "struct_module" found: kernel tainted.
NTFS-fs error (device hda2): parse_options(): Invalid uid option argument: anne
FAT: Unrecognized mount option "uid=anne" or missing value
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:11.2: detected 2 ports
uhci_hcd 0000:00:11.2: check_and_reset_hc: legsup = 0x003a
uhci_hcd 0000:00:11.2: Performing full reset
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 5, io base 0x0000a000
uhci_hcd 0000:00:11.2: supports USB remote wakeup
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
usb usb1: Manufacturer: Linux 2.6.13-venus uhci_hcd
usb usb1: SerialNumber: 0000:00:11.2
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
uhci_hcd 0000:00:11.2: port 1 portsc 01ab,00
hub 1-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s
ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
uhci_hcd 0000:00:11.3: detected 2 ports
uhci_hcd 0000:00:11.3: check_and_reset_hc: legsup = 0x0010
uhci_hcd 0000:00:11.3: Performing full reset
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:11.3: irq 5, io base 0x00009800
uhci_hcd 0000:00:11.3: supports USB remote wakeup
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
usb usb2: Manufacturer: Linux 2.6.13-venus uhci_hcd
usb usb2: SerialNumber: 0000:00:11.3
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
uhci_hcd 0000:00:11.4: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#3)
uhci_hcd 0000:00:11.4: detected 2 ports
uhci_hcd 0000:00:11.4: check_and_reset_hc: legsup = 0x2000
uhci_hcd 0000:00:11.4: Performing full reset
uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:11.4: irq 5, io base 0x00009400
uhci_hcd 0000:00:11.4: supports USB remote wakeup
usb usb3: default language 0x0409
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
usb usb3: Manufacturer: Linux 2.6.13-venus uhci_hcd
usb usb3: SerialNumber: 0000:00:11.4
usb usb3: hotplug
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: no power switching (usb 1.0)
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: local power source is good
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: skipped 1 descriptor after interface
usb 1-1: skipped 1 descriptor after interface
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: IR-USB Keyboard/Mouse
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usb 1-1: adding 1-1:1.1 (config #1, interface 1)
usb 1-1:1.1: hotplug
uhci_hcd 0000:00:11.2: port 2 portsc 01ab,00
hub 1-0:1.0: port 2, status 0301, change 0003, 1.5 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
usb 1-2: new low speed USB device using uhci_hcd and address 3
usb 1-2: skipped 1 descriptor after interface
usb 1-2: default language 0x0409
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Receiver
usb 1-2: Manufacturer: Logitech
usb 1-2: hotplug
usb 1-2: adding 1-2:1.0 (config #1, interface 0)
usb 1-2:1.0: hotplug
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0004
hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0006
uhci_hcd 0000:00:11.3: port 1 portsc 008a,00
hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:11.3: port 2 portsc 008a,00
hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0006
uhci_hcd 0000:00:11.4: port 1 portsc 008a,00
hub 3-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
uhci_hcd 0000:00:11.4: port 2 portsc 008a,00
hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
uhci_hcd 0000:00:11.3: suspend_rh (auto-stop)
uhci_hcd 0000:00:11.4: suspend_rh (auto-stop)
input: USB HID v1.00 Keyboard [IR-USB Keyboard/Mouse] on usb-0000:00:11.2-1
usbhid 1-1:1.1: usb_probe_interface
usbhid 1-1:1.1: usb_probe_interface - got id
input: USB HID v1.00 Mouse [IR-USB Keyboard/Mouse] on usb-0000:00:11.2-1
usbhid 1-2:1.0: usb_probe_interface
usbhid 1-2:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:11.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22
06:44:39 PST 2005
ACPI: PCI interrupt for device 0000:01:00.0 disabled
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22
06:44:39 PST 2005
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
uhci_hcd 0000:00:11.2: uhci_result_control: failed with status 440000
[dfaba1a0] link (1faba122) element (1fb63100)
Element != First TD
0: [dfb63040] link (1fb630c0) e3 LS Length=7 MaxLen=7 DT0 EndPt=0 Dev=2,
PID=2d(SETUP) (buf=1f146020)
1: [dfb630c0] link (1fb63100) e3 LS Length=0 MaxLen=0 DT1 EndPt=0 Dev=2,
PID=e1(OUT) (buf=1f06d100)
2: [dfb63100] link (00000001) e0 LS IOC Stalled CRC/Timeo Length=7ff
MaxLen=7ff DT1 EndPt=0 Dev=2, PID=69(IN) (buf=00000000)
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:11.2: port 1 portsc 018a,00
hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
usb 1-1: USB disconnect, address 2
usb 1-1: usb_disable_device nuking all URBs
usb 1-1: unregistering interface 1-1:1.0
usb 1-1:1.0: hotplug
usb 1-1: unregistering interface 1-1:1.1
usb 1-1:1.1: hotplug
usb 1-1: unregistering device
usb 1-1: hotplug
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x300
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
uhci_hcd 0000:00:11.2: port 1 portsc 01a3,00
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
usb 1-1: new low speed USB device using uhci_hcd and address 4
usb 1-1: skipped 1 descriptor after interface
usb 1-1: skipped 1 descriptor after interface
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: IR-USB Keyboard/Mouse
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
input: USB HID v1.00 Keyboard [IR-USB Keyboard/Mouse] on usb-0000:00:11.2-1
usb 1-1: adding 1-1:1.1 (config #1, interface 1)
usb 1-1:1.1: hotplug
usbhid 1-1:1.1: usb_probe_interface
usbhid 1-1:1.1: usb_probe_interface - got id
input: USB HID v1.00 Mouse [IR-USB Keyboard/Mouse] on usb-0000:00:11.2-1
usbcore: deregistering driver usbhid
uhci_hcd 0000:00:11.2: shutdown urb decc04e0 pipe 40408480 ep1in-intr
uhci_hcd 0000:00:11.2: shutdown urb decc0160 pipe 40408380 ep1in-intr
usbhid 1-2:1.0: usb_probe_interface
usbhid 1-2:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:11.2-2
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
input: USB HID v1.00 Keyboard [IR-USB Keyboard/Mouse] on usb-0000:00:11.2-1
usbhid 1-1:1.1: usb_probe_interface
usbhid 1-1:1.1: usb_probe_interface - got id
usb 1-1: modprobe timed out on ep0out len=0/0
usb 1-1: modprobe timed out on ep0in len=0/188
usb 1-1: modprobe timed out on ep0in len=0/188
usb 1-1: modprobe timed out on ep0in len=0/188
usb 1-1: modprobe timed out on ep0in len=0/188
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
uhci_hcd 0000:00:11.2: uhci_result_control: failed with status 440000
[dfaba1e0] link (1faba122) element (1fb63100)
Element != First TD
0: [dfb63040] link (1fb63080) e3 LS Length=7 MaxLen=7 DT0 EndPt=0 Dev=4,
PID=2d(SETUP) (buf=1f146040)
1: [dfb63080] link (1fb63100) e3 LS Length=0 MaxLen=0 DT1 EndPt=0 Dev=4,
PID=e1(OUT) (buf=1f06d280)
2: [dfb63100] link (00000001) e0 LS IOC Stalled CRC/Timeo Length=7ff
MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
usbcore: deregistering driver usbhid
uhci_hcd 0000:00:11.2: shutdown urb decc0e60 pipe 40408480 ep1in-intr
uhci_hcd 0000:00:11.2: shutdown urb c708e4e0 pipe 40408380 ep1in-intr
