Hello Javier, On Monday 21 November 2005 21:32, Javier Campos wrote: > Attempting to use the gadget layer for ethernet with a windows host > gives me some problems. I am using the gadget backport in 2.4 on a > Texas Instrument 2420 omap board. > > The problem is that if the USB cable is connected before Linux is up > > - Windows-2000 reset several times the RNDIS driver. > - On Windows XP the ipconfig fails > > If the cable is connected after Linux has started, then everything is > fine.
How does your USB device tells the host that it is present? There must be a 1.5KOhm Resistor to +3.3V. This resistor must be connected to an output port and switched HIGH if the USB drivers are loaded - and switched LOW before the USB drivers are unloaded. best regards Wolfgang ------------------------------------------------------- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
